Unit of competency Outline

Date retreived
22/07/2026 8:02 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install, test and evaluate pilot version of ICT system

Install, test and evaluate pilot version of ICT system

Unit of competency
National Code
ICTPRG517
State Code
AUV99
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
25/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
029999 - Information Technology, N.e.c.
Original Release Date
16/09/2015
Nominal Hours
20
Description
This unit describes the skills and knowledge required to install a pilot version of a developed information and communications (ICT) system, and test it with a small group of users, in order to evaluate it against the agreed criteria.It applies to individuals who are senior staff in a development area who are required to test and evaluate new systems.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for the pilot system
  • 1.1 Establish and confirm the objectives, success criteria and acceptance criteria, for pilot implementation
  • 1.2 Identify and secure, the technical and organisational resources required for pilot implementation
  • 1.3 Establish and confirm executive support for the pilot
  • 1.4 Complete the project plan for the pilot, and refer the project documentation to the appropriate person for their approval
2. Install the pilot system
  • 2.1 Install and configure pilot according to the project plan
  • 2.2 Verify and record the technical readiness of the pilot
  • 2.3 Take the necessary actions to determine accuracy of the data
  • 2.4 Prepare a status report, and submit to the appropriate person for their sign-off
3. Test the pilot system
  • 3.1 Work with stakeholders to identify and release the appropriate pilot group
  • 3.2 Brief the pilot-team members on the objectives of the test
  • 3.3 Train the pilot-team members in the new system
  • 3.4 Run the test
4. Evaluate the results and feedback of the pilot
  • 4.1 Assess computerised results of the pilot test
  • 4.2 Interview pilot group members in order to obtain feedback
  • 4.3 Document the feedback and results
  • 4.4 Evaluate according to success, and the acceptance criteria previously established
  • 4.5 Report the final recommendations from the pilot, with regard to a complete installation of the pilot system, to the appropriate person
No information
No information
Replaces
State Code National Code Title Type
D8032 ICAPRG517A Install, test and evaluate pilot version of IT system Unit of competency
Replaced By
State Code National Code Title Type
OBS98 ICTPRG544 Install, test and evaluate pilot version of ICT systems Unit of competency
State Code National Code Title Type
AWF1 ICT50115 Diploma of Information Technology Qualification
BEH1 ICT50118 Diploma of Information Technology Qualification