Unit of competency Outline

Date retreived
23/07/2026 10:02 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply basic colour matching techniques using vehicle paint codes

Apply basic colour matching techniques using vehicle paint codes

Unit of competency
National Code
AURVTP004
State Code
AWZ52
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
13/07/2016
Nominal Hours
24
Description
This unit describes the performance outcomes required to colour match paints using original equipment manufacturer (OEM) paint codes. It involves preparing for the task, selecting and using specialist tools and equipment, preparing colour matching test cards, mixing and spraying paint and conducting a visual colour match, and completing workplace processes and documentation.It applies to those working in the automotive paint refinishing repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to apply basic colour matching techniques
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Colour matching information is accessed and interpreted
  • 1.3 Paint colour matching materials are selected and inspected for quality
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Spray painting tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • 1.6 Work is planned to identify colour matching techniques, minimise waste, and use time efficiently
2. Mix paint colour
  • 2.1 Paint measuring system required for job is set up and checked
  • 2.2 Colours are mixed using approved methods, tools, equipment and materials, and without causing damage to vehicle and components
  • 2.3 Mixing activities are completed according to workplace procedures, paint safety data sheets (SDS), and safety and environmental requirements
3. Prepare colour test cards and perform visual matching
  • 3.1 Test cards are prepared and sprayed to enable a visual comparison between matched and original paint
  • 3.2 Visual matching is carried out, comparisons are made between matched and original paint, and paint codes are recorded
  • 3.3 Painting and matching activities are carried out according to workplace procedures, OEM paint codes, and safety and environmental requirements
  • 3.4 Paint is remixed for further matching if first mix does not match original paint
4. Complete work processes
  • 4.1 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.2 Final inspection is made to ensure work meets workplace expectations and matched paint colour is presented ready for use
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF523 AURVTP2004 Apply fundamental colour matching techniques Unit of competency
Replaced By
State Code National Code Title Type
OCJ74 AURVTP104 Apply basic colour matching techniques using vehicle paint codes Unit of competency
State Code National Code Title Type
BAB9 AUR32416 Certificate III in Automotive Refinishing Technology Qualification