Unit of competency Outline

Date retreived
22/07/2026 12:56 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Seal concrete pavements

Seal concrete pavements

Unit of competency
National Code
RIICRC320D
State Code
WH136
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
27/05/2014
Field of Education
030901 - Construction Engineering
Original Release Date
27/05/2014
Nominal Hours
12
Description
This unit describes a participant’s skills and knowledge required to seal concrete pavements in Civil Construction.This unit is appropriate for those working in operational roles. No licensing, legislation, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare to seal concrete pavements
  • 1.1 Access, interpret and apply concrete pavements sealing documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.4 Select and wear correct personal protective equipment appropriate for work activities
  • 1.5 Identify, obtain, confirm and implement signage requirements
  • 1.6 Select and check for faults to tools and equipment, to carry out tasks
2. Select and use hand tools
  • 2.1 Select hand tools consistent with needs of the job
  • 2.2 Check tools for serviceability and safety, and report faults
  • 2.3 Clamp or fix materials in position
  • 2.4 Use hand tools safely and effectively according to their intended use
  • 2.5 Locate hand tools safely when not in immediate use
  • 2.6 Monitor movements and hazards, identify and communicate changes to the work environment during the work process
3. Select and use power tools
  • 3.1 Select power tools and equipment consistent with needs of job and in accordance with standard work practice, and report any faults
  • 3.2 Check tools for serviceability and safety, and report faults
  • 3.3 Visually check power leads/hoses for serviceability/safety in accordance with the site safety plan
  • 3.4 Clear route for safe placement of leads/hoses of identified hazards
  • 3.5 Run electrical power leads to power supply so they are clear of traffic and covered where possible
  • 3.6 Connect electric power leads to the power board or direct to power tool
  • 3.7 Run air hoses out to the compressed air supply and cover where potential trip hazards exist
  • 3.8 Connect hose to power tool and air supply
  • 3.9 Use power tools safely and effectively in application processes and ensure correct storage when not in use
  • 3.10 Clean out and prepare for joint sealing
  • 3.11 Complete written joint sealing records
4. Clean up
  • 4.1 Clear work area and dispose of, reuse or recycle materials
  • 4.2 Clean, check, maintain and store machinery, tools and equipment
No information
No information
Replaces
State Code National Code Title Type
WC339 RIICRC320 Seal concrete pavements Unit of competency
Replaced By
State Code National Code Title Type
OCW64 RIICRC320E Seal concrete pavements Unit of competency