Unit of competency Outline

Date retreived
23/07/2026 9:41 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct concrete road curing and texturing operations

Conduct concrete road curing and texturing operations

Unit of competency
National Code
RIICRC313D
State Code
WH129
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
27/05/2014
Field of Education
030901 - Construction Engineering
Original Release Date
27/05/2014
Nominal Hours
24
Description
This unit describes a participant’s skills and knowledge required to conduct concrete road curing and texturing operations in Civil Construction.This unit is appropriate for those working in operational roles Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for concrete road curing and texturing operations
  • 1.1 Access, interpret and apply concrete road curing and texturing documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.4 Select and wear correct personal protective equipment appropriate for work activities
  • 1.5 Identify, obtain, confirm and implement signage requirements
  • 1.6 Select and check for faults all plant, tools and equipment to carry out
2. Setup and maintain the texture and curer machine
  • 2.1 Ensure correct Set up paver width and settings
  • 2.2 Use paving drawings and survey markings to establish work area
  • 2.3 Conduct pre-operational checks including prestart checks
  • 2.4 Check filters and sprays for correct operation
  • 2.5 Adjust stringline sensors within workplace specifications
3. Operate the texture and curer machine
  • 3.1 Check for hazards around the texture curing machine
  • 3.2 Make adjustments to sensors and controls while paving
  • 3.3 Use communication systems and hand signals within workplace specifications
  • 3.4 Check spray rates for correct operation
  • 3.5 Check texture rake configuration for correct settings
4. Shut down and clean up
  • 4.1 Secure machine with appropriate safety supports
  • 4.2 Check and clean filters and nozzles
  • 4.3 Clean work area and dispose of, or recycle, materials
  • 4.4 Clean, check, maintain and store plant and tools
  • 4.5 Safely park machine
No information
No information
Replaces
State Code National Code Title Type
WC332 RIICRC313 Conduct concrete road curing and texturing operations Unit of competency
Replaced By
State Code National Code Title Type
OCX79 RIICRC313E Conduct concrete road curing and texturing operations Unit of competency