Unit of competency Outline

Date retreived
22/07/2026 10:57 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct concrete road curing and texturing operations

Conduct concrete road curing and texturing operations

Unit of competency
National Code
RIICRC313E
State Code
OCX79
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2021
View on TGA
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
030901 - Construction Engineering
Original Release Date
18/06/2021
Nominal Hours
24
Description
This unit describes the skills and knowledge required to conduct concrete road curing and texturing operations in civil construction, including operating and maintaining texture and curing machines.It applies to those working in operational roles. They generally work under minimal supervision to undertake a broad range of tasks in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to conduct concrete road curing and texturing operations
  • 1.1 Obtain, interpret, clarify and confirm work requirements
  • 1.2 Access, interpret and apply documentation required to conduct concrete road curing and texturing operations and confirm work activity is compliant
  • 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.4 Select and wear personal protective equipment according to site requirements
  • 1.5 Identify, obtain, confirm and implement signage requirements
  • 1.6 Select all plant, tools and equipment required to carry out tasks and check for faults
2. Set up and maintain texture and curer machine
  • 2.1 Set up paver width and settings according to job requirements
  • 2.2 Establish work area according to paving drawings and survey markings
  • 2.3 Carry out prestart and startup procedures according to manufacturer specifications and site requirements
  • 2.4 Check filters and sprays and confirm operation according to job requirements
  • 2.5 Adjust stringline sensors according to job requirements
3. Operate texture and curer machine
  • 3.1 Check for hazards around texture curing machine and implement controls as required
  • 3.2 Adjust sensors and controls while paving according to job requirements
  • 3.3 Use communication systems and hand signals according to job and site requirements
  • 3.4 Check spray rates and confirm operation against job requirements
  • 3.5 Check texture rake configuration and specified settings against job requirements
4. Carry out shut down and clean-up activities
  • 4.1 Secure machine with safety supports according to manufacturer specifications and site requirements
  • 4.2 Park and shut down machine according to manufacturer specifications and site requirements
  • 4.3 Check and clean filters and nozzles according to manufacturer specifications and site requirements
  • 4.4 Clean work area and dispose of, or recycle, materials according to site requirements
  • 4.5 Clean, check, maintain and store plant and tools according to manufacturer specifications and site requirements
No information
No information
Replaces
State Code National Code Title Type
WH129 RIICRC313D Conduct concrete road curing and texturing operations Unit of competency