Unit of competency Outline
Date retreived
22/07/2026 3:37 AM AWST
22/07/2026 3:37 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Collect routine site samples
Collect routine site samples
Unit of competency
National Code
MSL952001
MSL952001
State Code
AWO36
AWO36
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
16/08/2016
Field of Education
019909 - Laboratory Technology
Original Release Date
16/08/2016
Nominal Hours
20
Description
This unit of competency covers the ability to collect samples at field or production sites using specified equipment and standard or routine procedures.This unit of competency is applicable to production operators, field assistants and laboratory assistants in all industry sectors.While no specific licensing or certification requirements apply to this unit at the time of publication, laboratory operations are governed by relevant legislation, regulations and/or external accreditation requirements. Local requirements should be checked.
Notes
Elements and Performance Criteria
1 Prepare for sampling
- 1.1 Confirm the purpose, priority and scope of the sampling request
- 1.2 Liaise with relevant personnel to arrange site access and all necessary clearances/permits
- 1.3 Identify site hazards and review workplace safety procedures
- 1.4 Confirm what samples are to be collected, from where, how and when
- 1.5 Assemble all specified sampling equipment, safety equipment, materials and containers
- 1.6 Conduct pre-use and cleanliness checks of all items to ensure they are fit for purpose
- 1.7 Check all items against given inventory and stow them to ensure safe transport
2 Conduct sampling
- 2.1 Locate sampling points and services at the site
- 2.2 Remove security devices, such as locks and covers as required
- 2.3 Seek advice if the required samples cannot be collected or if procedures require modification
- 2.4 Select and use required sampling equipment in accordance with given procedures
- 2.5 Closely follow sampling procedures to obtain required samples and maintain their integrity
- 2.6 Record all labelling information in accordance with workplace/legal traceability requirements
- 2.7 Record sample appearance, environmental conditions and any other factors that may impact on sample integrity
- 2.8 Replace security devices, such as locks and covers as required
3 Finalise sampling
- 3.1 Follow workplace procedures for the cleaning/decontamination of equipment and vehicle as necessary
- 3.2 Check all equipment, materials and samples against inventory and stow for safe transport
- 3.3 Liaise with relevant personnel to restore normal production and/or services as necessary
- 3.4 Maintain integrity of samples during transportation
- 3.5 Deliver samples to the required collection point and complete all documentation to ensure traceability
- 3.6 On return, check and document serviceability of equipment before storage
4 Maintain a safe work environment
- 4.1 Use established work practices and personal protective equipment (PPE) to ensure personal safety and that of others
- 4.2 Minimise environmental impacts of sampling and generation of waste
- 4.3 Dispose of all waste in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA692 | MSL952001A | Collect routine site samples | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OEX81 | MSL952003 | Collect routine site samples | Unit of competency |