Unit of competency Outline

Date retreived
22/07/2026 8:10 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fabricate automotive and marine trim components

Fabricate automotive and marine trim components

Unit of competency
National Code
AURVTS006
State Code
AWZ21
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to measure, mark out, cut and fabricate automotive or marine trim components to given specifications. It involves preparing for the task, selecting and using specialist tools and equipment, checking material quality, calculating material quantity, assembling and trimming components, identifying fabrication defects, and completing workplace processes and documentation.It applies to those working in the automotive and marine trimming industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to fabricate trim components
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Materials are selected and inspected for quality
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Fabrication tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • 1.5 Work is planned to identify methods for fabricating trim components, minimise waste, and use time effectively
2. Perform fabrication
  • 2.1 Components are fabricated to specification according to workplace instructions, customer and job requirements, and safety and environmental requirements
  • 2.2 Fabricated component is inspected against workplace quality requirements and fabrication defects are reported to appropriate personnel according to workplace procedures
3. Complete work processes
  • 3.1 Final inspection is made to ensure fabrication work meets workplace expectations and component is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF547 AURVTS2006 Carry out fabrication of components Unit of competency