Unit of competency Outline
Date retreived
22/07/2026 6:46 AM AWST
22/07/2026 6:46 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Repair and align motorcycle frames
Repair and align motorcycle frames
Unit of competency
National Code
AURJTY001
AURJTY001
State Code
AXC88
AXC88
TGA Status
Deleted
Deleted
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030511 - Panel Beating
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to inspect motorcycle frames, determine and carry out required repairs, and then align the frames and their components. It involves preparing for the task, inspecting, measuring, repairing and aligning motorcycle frames, and completing workplace processes and documentation.It applies to those working in the motorcycle service and repair industry. It includes all types of motorcycle frames, including those with side cars and carrying compartments.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to inspect and measure motorcycle frame
- 1.1 Job requirements are determined from workplace instructions
- 1.2 Frame specifications and repair procedures are sourced and interpreted
- 1.3 Inspection and measurement options are analysed and those most appropriate to the circumstances are selected
- 1.4 Hazards associated with the work are identified and risks are managed
- 1.5 Inspection and measurement tools and equipment are selected and checked according to manufacturer procedures
2. Inspect and measure frame
- 2.1 Frame is inspected and repair requirements are determined according to workplace procedures and safety requirements
- 2.2 Inspection results are compared with manufacturer specifications
- 2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
3. Repair frame
- 3.1 Repair procedures and information are sourced and interpreted
- 3.2 Repair options are analysed and those most appropriate to the circumstances are selected
- 3.3 Repair tools, equipment and materials are selected and checked for serviceability
- 3.4 Frame is repaired, replaced and adjusted according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems
4. Align frame
- 4.1 Alignment procedures and information are sourced and interpreted
- 4.2 Alignment options are analysed and those most appropriate to the circumstances are selected
- 4.3 Alignment tools, equipment and materials are selected and checked according to manufacturer procedures
- 4.4 Frame is aligned according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems
5. Complete work processes
- 5.1 Final inspection is made to ensure work is to workplace expectations and frame is presented ready for use or stored
- 5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
- 5.3 Tools and equipment are checked and stored according to workplace procedures
- 5.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF194 | AURJTY3001 | Repair and align motorcycle frames | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAC7 | AUR30916 | Certificate III in Motor Sport Technology | Qualification |
| BFY6 | AUR30920 | Certificate III in Motor Sport Technology | Qualification |