Unit of competency Outline

Date retreived
22/07/2026 4:44 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Weld using flame powder spraying

Weld using flame powder spraying

Unit of competency
National Code
MEM05041
State Code
OAW80
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
18/04/2021
Field of Education
030711 - Boilermaking And Welding
Original Release Date
18/04/2021
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to perform flame powder spraying, on a range of heavy or light materials and applies to welding of materials using powder spraying equipment where powders are fed through the flame and are deposited onto the surface to be built up or joined.Weld quality could include welding that conforms to Australian Standard 1554 General Purpose and American Bureau of Shipping (ABS) or equivalent.For remedial action using machining processes other than grinding with grinding wheels (ceramic or other) appropriate machining units should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, sketches, job sheets or work instructions
2 Prepare work for spray welding
  • 2.1 Prepare materials to achieve the required weld requirements
  • 2.2 Assemble/align work to specifications, as required
3 Select, assemble and set up spray welding equipment and powders
  • 3.1 Select appropriate spray welding equipment and consumables for materials and work requirements
  • 3.2 Ensure powder flame spray welding equipment is in safe working condition
  • 3.3 Assemble welding equipment and set up in accordance with SOPs
  • 3.4 Adjust gas setting on spray welding equipment to task requirements
4 Minimise and rectify distortion
  • 4.1 Identify distortion prevention/control measures
  • 4.2 Apply appropriate distortion prevention/control measures to minimise and rectify distortion
  • 4.3 Deposit spray weld to specification
5 Inspect spray weld
  • 5.1 Inspect weld area/joints visually against specification
  • 5.2 Rectify any weld defects with minimum loss of sound metal using correct techniques and tools
No information
No information
Replaces
State Code National Code Title Type
W5316 MEM05041B Weld using powder flame spraying Unit of competency
Replaced By
State Code National Code Title Type
OEU33 MEM05095 Weld using flame powder spraying Unit of competency