Unit of competency Outline

Date retreived
22/07/2026 8:11 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Undertake magnetic particle tests

Undertake magnetic particle tests

Unit of competency
National Code
MEM24024
State Code
OFH26
TGA Status
Current
DTWD Status
Pending
Current Release Number
1.00
Current Release Date
04/09/2025
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030305 - Materials Engineering
Original Release Date
Nominal Hours
Description
This unit of competency defines the skills and knowledge required to undertake magnetic particle testing in a range of industrial applications. Personnel are required to select the most appropriate magnetic particle test techniques and test equipment for a specific material or application; interpret the test data; detect and classify defects using relevant standards; and report the results.Magnetic particle tests are performed on critical components or structural zones. Personnel are required to consider actual and potential defects as well as ongoing abnormalities in fabrications, components, structures and/or aircraft components.This unit of competency applies to engineering technicians and non-destructive testing (NDT) technicians who are performing penetrant tests as defined in Australian and international codes and standards working in manufacturing, engineering aerospace and associated industry sectors. These employees work under the general supervision of personnel such as engineering associates, NDT technicians aligned to level 3 in technical standards; professional engineers and scientists; engineering technologists; and production, operations and maintenance managers.Where reading and interpretation of technical drawings is required unit MEM09229 Read and interpret technical drawings should also be selected.Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of hand tools are required unit MEM18001 Use hand tools should also be selected.Where the selection and use of power tools are required unit MEM18002 Use power tools/hand held operations should also be selected.Where the application of materials technology principles is required unit MEM24039 Apply materials technology principles to non-destructive tests to should also be selected.Band: BUnit Weight: 4Assessment as competent against MEM24024 Undertake magnetic particle tests may contribute to certification against Australian NDT standards where assessment of this unit of competency is carried out in conjunction with an examining authority as described in AS ISO 9712 NDT - Qualification and certification of personnel or subsequent Standards.
Notes
Elements and Performance Criteria
1. Establish job requirements
  • 1.1 Comply with relevant WHS and regulatory requirements, codes of practice, and standards for magnetic particle testing
  • 1.2 Identify job requirements from specifications, drawings, job sheets, previous NDT results or work instructions
2. Prepare for testing
  • 2.1 Liaise with client to explain testing requirements and schedule tests
  • 2.2 Use established safe work practices and personal protective equipment (PPE) in accordance with SOPs
  • 2.3 Assemble all specified testing equipment, materials and containers and safety equipment
  • 2.4 Identify inspection areas and determine if special access requirements appropriate for the NDT test need to be communicated to the client
  • 2.5 Clean and prepare inspection areas for testing using appropriate test procedures and materials
  • 2.6 Assess inspection areas visually and identify obvious discontinuities
3. Conduct magnetic particle tests
  • 3.1 Select the most appropriate magnetic particle test technique for the material or application
  • 3.2 Select test equipment and conduct pre-use checks in accordance with relevant standards and/or procedures
  • 3.3 Select and apply appropriate test media in accordance with workplace/industry practices
  • 3.4 Conduct magnetic particle tests in accordance with relevant standards and work instructions
  • 3.5 De-magnetise material according to specification
  • 3.6 Minimise environmental impacts of testing and generation of waste
  • 3.7 Record any site observations that may affect results
4. Interpret and report results of magnetic particle tests
  • 4.1 Review conduct of the test and confirm test procedures were applied correctly
  • 4.2 Monitor and assess indications and determine the type of discontinuity for each relevant indication
  • 4.3 Apply acceptance criteria to discontinuities to detect defects
  • 4.4 Classify defects in accordance with relevant national and international codes and standards
  • 4.5 Confirm defects in accordance with workplace procedures and industry practices
  • 4.6 Seek advice for problems outside technical competence or knowledge
  • 4.7 Record and classify test results
  • 4.8 Report test results and complete all job records in accordance with relevant standards, workplace procedures or accepted industry practices and customer service requirements
5. Maintain a safe work environment
  • 5.1 Restore test site, clean inspection area and equipment and dispose of all waste in accordance with enterprise procedures
  • 5.2 Store and maintain magnetic particle testing equipment in accordance with standard operating procedures and WHS requirements
No information
No information
Replaces
State Code National Code Title Type
OEW28 MEM24004 Perform magnetic particle testing Unit of competency