Unit of competency Outline

Date retreived
22/07/2026 7:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare for cutting forme and stripper making

Prepare for cutting forme and stripper making

Unit of competency
National Code
ICPCBF311
State Code
AUO67
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
50
Description
This unit describes the skills and knowledge required to prepare for making cutting formes and strippers.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for die and stripper making
  • 1.1 Die and stripper making requirements are identified and selected from die drawing or inspection
  • 1.2 Availability of all job related components is checked
  • 1.3 Materials chosen are appropriate for cutting forme design and the machine cutting forme/stripper they are to be used on
2. Prepare materials
  • 2.1 Cutting forme/stripper making materials are assessed and cut to size
  • 2.2 Cutting forme/stripper making materials are correct size for production requirements
  • 2.3 Stripper backing material is correct size for production requirements
  • 2.4 Product design is drawn onto cutting forme blank to match cutting forme design
  • 2.5 Drawing is in register on cutting forme blank
  • 2.6 Drawing is in register on stripper backing material
3. Prepare lay down sheet and cutting forme tracing
  • 3.1 Lay down sheet and cutting forme tracing are glued correctly onto cutting forme blank
  • 3.2 Lay down sheet is in register on cutting forme blank
  • 3.3 Cutting forme tracing matches product design
4. Design location of bridges, stripping rule and mounting holes
  • 4.1 Cutting forme maintains required strength
  • 4.2 Waste is cut to suit waste extraction system
  • 4.3 Mounting holes register with holes in cutting forme blank
No information
No information
Replaces
State Code National Code Title Type
D3050 ICPCF311C Prepare for cutting forme and stripper making Unit of competency