Unit of competency Outline

Date retreived
22/07/2026 10:34 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate an automatic screen printing machine

Operate an automatic screen printing machine

Unit of competency
National Code
ICPSCP376
State Code
AUP26
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
60
Description
This unit describes the skills and knowledge required to produce a print on a range of common substrates, using automatic equipment and screening techniques.It applies to individuals working in the printing and graphic arts industry who may have to set up and operate power-driven or hand-operated screen printing machines. They may have to provide leadership and guidance to others and have some limited responsibility for the output of others.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify job requirements
  • 1.1 Substrate is checked against job specifications with any irregularities reported and rectified where possible
  • 1.2 Ink is checked against job specifications
  • 1.3 Artwork is checked against job specifications
2 Prepare machine to print
  • 2.1 Correct film and emulsion exposure is set and correctly completed according to job specifications
  • 2.2 Substrate position and screen alignment are set according to job specifications
  • 2.3 Ink is applied to screen in quantity required for screen size
  • 2.4 Equipment is kept clean and spills are minimised
3 Produce proof print
  • 3.1 Proof print is run off and checked for colour, strength, registration, adhesion, clarity, gloss level, drying or curing, artwork detail and other technical aspects according to job specifications
  • 3.2 Adjustments are made according to product and machine specifications
  • 3.3 Belt speed and temperature required are set to achieve desired curing or drying properties
  • 3.4 Appropriate approval to commence production is sought prior to commencement
  • 3.5 Packaged goods are weighed using appropriate weighing machines and scales, and labelled according to delivery instructions, transportation/shipping regulations and enterprise procedures
4 Run job and monitor print quality
  • 4.1 Printing speed production is adjusted to maximise quality and output
  • 4.2 Print quality is continuously evaluated and adjusted as required
  • 4.3 Effects of ink alterations during run are monitored and appropriate action taken according to manufacturer or supplier and job specifications
  • 4.4 Workplace documentation is completed as required
  • 4.5 Curing and drying are constantly monitored and adjusted according to manufacturer or supplier and job specifications
5 Carry out routine user maintenance
  • 5.1 Equipment is cleaned according to enterprise procedures
  • 5.2 Lights are replaced as necessary and alerts or alarms are tested
  • 5.3 Faults are identified and reported according to enterprise procedures
6 Stack production output
  • 6.1 Output is checked for thorough drying or curing before stacking
  • 6.2 Job is labelled and recorded according to enterprise procedures
  • 6.3 Job status and progress are checked against job specifications and any necessary action is taken
7 Conduct shutdown of the production process
  • 7.1 Material is transferred to correct destination in safe manner
  • 7.2 Excess ink, screens, squeegees and flood coaters are removed and cleaned according to work health and safety (WHS) requirements and manufacturer or supplier specifications
  • 7.3 Waste materials are disposed of according to manufacturer or supplier specifications, regulatory requirements and enterprise procedures
  • 7.4 Equipment and surrounding areas are cleaned according to manufacturer or supplier specifications and enterprise procedures
  • 7.5 Tools and equipment are stored and maintained according to manufacturer specifications to ensure ease of access and operator safety
  • 7.6 Correct procedure for dealing with spilt chemicals is demonstrated according to WHS requirements
No information
No information
Replaces
State Code National Code Title Type
D3236 ICPSP376C Operate an automatic screen printing machine Unit of competency
Replaced By
State Code National Code Title Type
OBQ61 ICPSCP3760 Operate an automatic screen printing machine Unit of competency