Unit of competency Outline

Date retreived
22/07/2026 12:12 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform manual production assembly

Perform manual production assembly

Unit of competency
National Code
MEM03001
State Code
OAX40
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
24/01/2020
Field of Education
030399 - Process And Resources Engineering, N.e.c.
Original Release Date
24/01/2020
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required by production workers to assemble components and/or sub-assemblies in a production environment, and applies to assembly operations that are manual in nature and do not require complex adjustments. Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of manual handling is required unit MEM11011 Undertake manual handling should also be selected.Where the selection and use of engineering measuring equipment is required unit MEM12023 Perform engineering measurements should also be selected. Where the selection and use of hand tools is required unit MEM18001 Use hand tools should also be selected. Where the selection and use of power tools is required unit MEM18002 Use power tools/hand held operations should also be selected. This unit should not be selected when unit MEM18055 Dismantle, replace and assemble engineering components has already been selected. No licensing, legislative or certification requirements apply to this unit at the time of publication. Band: A Unit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, sketches, job sheets or work instructions
2 Select assembly equipment and components
  • 2.1 Select assembly equipment according to instructions or job sheets
  • 2.2 Obtain components/sub-assemblies and arrange for assembly process
  • 2.3 Use equipment and tools in a safe manner
3 Perform assembly and tests
  • 3.1 Assemble components in the correct sequence to meet specifications
  • 3.2 Test and check assembly for compliance to job sheet requirements, taking appropriate action for non-compliance
4 Store and protect assembly
  • 4.1 Handle and store components and/or assemblies safely and in a manner least likely to cause damage
  • 4.2 Record information on assembly data production schedules, job sheets, checklists and other standard forms and templates
No information
No information
Replaces
State Code National Code Title Type
W5265 MEM03001B Perform manual production assembly Unit of competency