Unit of competency Outline
Date retreived
22/07/2026 11:10 PM AWST
22/07/2026 11:10 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Source and estimate materials
Source and estimate materials
Unit of competency
National Code
MEM22006A
MEM22006A
State Code
W5676
W5676
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
20/08/2012
Field of Education
080301 - Business Management
Original Release Date
20/08/2012
Nominal Hours
20
Description
This unit covers working with others to define material requirements, estimate material required and identify appropriate sources to access the material.
Notes
Elements and Performance Criteria
1. Identify the material requirements and sources
- 1.1. Interpret technical information.
- 1.2. Analyse material requirements in consultation with interested parties.
- 1.3. Compare options for materials against technical requirements.
- 1.4. Identify costs of materials.
2. Prepare materials estimates
- 2.1. Confirm the currency and accuracy of the figures and rates to be used in calculations.
- 2.2. Calculate estimates in accordance with specification requirements and procedures.
- 2.3. Document and present estimates that meet the initial requirements.
3. Procure materials/resources
- 3.1. Order materials and components.
- 3.2. Maintain ordering and purchasing documentation.
- 3.3. Receive and inspect materials/resources.
4. Prepare materials/components/systems for use in the project/operation
- 4.1. Identify methods for the preparation of materials.
- 4.2. Schedule the delivery and preparation of materials.
- 4.3. Prepare certification reports on the characteristics and uses of materials Ensure materials usage procedures comply with legislation, codes and national standards.
- 4.4. Accept or reject materials.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Estimates
Identifying source of appropriate materials and estimation of the quantities required and/or confirmation of the sources of materials and finalising the estimations
Document
Quantity estimates, schedules, test certification and other documentation will be generated during this process
Legislation, codes and national standards
May use relevant legislation, regulation, codes and national standards relevant to the workplace.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Estimates
Identifying source of appropriate materials and estimation of the quantities required and/or confirmation of the sources of materials and finalising the estimations
Document
Quantity estimates, schedules, test certification and other documentation will be generated during this process
Legislation, codes and national standards
May use relevant legislation, regulation, codes and national standards relevant to the workplace.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be source and estimate materials. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with sourcing and estimating materials or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be source and estimate materials. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with sourcing and estimating materials or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WE914 | MEM22015A | Source and estimate engineering materials requirements | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W249 | MEM60105 | Advanced Diploma of Engineering | Qualification |
| W248 | MEM50205 | Diploma of Engineering - Technical | Qualification |
| 3168 | 91469NSW | Diploma of Product Design | Accredited course |
| 3169 | 91470NSW | Advanced Diploma of Product Design And Innovation | Accredited course |