Unit of competency Outline

Date retreived
22/07/2026 6:02 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out soft soldering techniques

Carry out soft soldering techniques

Unit of competency
National Code
AURTTW001
State Code
AXA29
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030511 - Panel Beating
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to carry out soft soldering of vehicle components. It involves preparing for the task, carrying out soft soldering procedures, performing post-repair testing, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The components to be soft soldered include ferrous or non-ferrous materials in vehicles from all sectors of the industry, including vehicle radiators or fuel tanks.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to carry out soft soldering
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Soft soldering procedures and information are sourced and interpreted
  • 1.3 Repair options are analysed and those most appropriate to the circumstances are selected
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Materials, tools and equipment are selected and checked for serviceability
  • 1.6 Personal protective equipment (PPE) is chosen and prepared according to workplace procedures and safety requirements
  • 1.7 Components and materials to be soft soldered are cleaned and prepared according to workplace and safety requirements
2. Carry out soft soldering
  • 2.1 Soldering is carried out using correct and appropriate techniques, including appropriate use of flux, according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components, systems or equipment
  • 2.2 Soldered joint is tested using appropriate techniques and equipment to ensure compliance with manufacturer specifications
3. Complete work processes
  • 3.1 Final inspection is made to ensure work is to workplace expectations and component or vehicle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 3.3 Tools and equipment are checked and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF443 AURTTW2001 Carry out soft soldering techniques Unit of competency