Unit of competency Outline

Date retreived
22/07/2026 4:55 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use casting and moulding techniques to make props

Use casting and moulding techniques to make props

Unit of competency
National Code
CUAPRP402
State Code
WI168
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
15/01/2016
View on TGA
State Implementation and Classification
Approved Date
16/05/2014
Field of Education
100103 - Drama And Theatre Studies
Original Release Date
16/05/2014
Nominal Hours
50
Description
This unit describes the performance outcomes, skills and knowledge required to construct props for theatre and screen productions using casting and moulding techniques.Individuals who apply these skills work autonomously in a team environment as they take responsibility for making props using casting and moulding techniques. They may also be responsible for supervising others.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Determine prop requirements
  • 1.1 Confirm prop production requirements in consultation with relevant colleagues and with reference to props documentation
  • 1.2 Decide which casting and moulding techniques are best suited to the types of props required
2. Prepare for prop construction
  • 2.1 Select most appropriate mould based on an analysis of how prop items are to be used and the advantages and disadvantages of different options
  • 2.2 Take budget and timelines into account when making decisions about constructing props
  • 2.3 Select tools, equipment and materials appropriate to the casting or moulding technique to be used
  • 2.4 Calculate quantities of required materials, avoiding waste where possible
3. Construct props
  • 3.1 Use techniques, tools and materials to create moulds and casts, ensuring that safety procedures are followed at all times
  • 3.2 Check items produced in terms of durability, quality of finish and suitability for production requirements
  • 3.3 Seek feedback on work in progress and adjust techniques as required
  • 3.4 Prepare items in readiness for finishing, according to production requirements
  • 3.5 Contribute to evaluation of prop construction processes and note ways to improve own work performance
No information
No information
Replaces
State Code National Code Title Type
D1566 CUEPRP04B Use casting and moulding techniques to make props Unit of competency
Replaced By
State Code National Code Title Type
ODF67 CUAPRP412 Use casting and moulding techniques to make props Unit of competency