Unit of competency Outline

Date retreived
22/07/2026 3:30 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install aggregate paths

Install aggregate paths

Unit of competency
National Code
AHCLSC203
State Code
BAM38
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
040399 - Building, N.e.c.
Original Release Date
12/01/2017
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to install aggregate paths in landscape projects.This unit applies to individuals who work under general supervision and exercise limited autonomy with some accountability for their own work. They undertake defined activities and work in a structured context.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for installation
  • 1.1 Confirm work instructions with the supervisor
  • 1.2 Prepare tools and equipment for use
  • 1.3 Check the quantity and quality of materials
  • 1.4 Identify and report to supervisor manual handling issues and other work health and safety hazards
  • 1.5 Select, use and maintain personal protective equipment (PPE) and clothing
  • 1.6 Put in place measures to avoid environmental impacts before starting work
2. Set out the site for path construction
  • 2.1 Mark out the location of the proposed path
  • 2.2 Put public risk protection measures in place
3. Undertake ground preparation
  • 3.1 Clear the area of debris and excavate to base level
  • 3.2 Relocate or dispose of soil and waste materials
  • 3.3 Place and compact base material to the required finished level
  • 3.4 Install drainage structures
  • 3.5 Install edge restraints, where required
  • 3.6 Check set out work at regular intervals with supervisor, according to the site plan
4. Lay surface aggregate materials
  • 4.1 Spread surface aggregate materials over the area to the designated depth
  • 4.2 Screed material to ensure consistent depth of materials
  • 4.3 Level aggregate materials to the designated level and falls
  • 4.4 Compact aggregate materials using appropriate machinery
5. Make good the site
  • 5.1 Dispose of or recycle soil and waste material from the site
  • 5.2 Reinstate areas disturbed by installation works
  • 5.3 Clean and store all tools and equipment
No information
No information
Replaces
State Code National Code Title Type
D6912 AHCLSC203A Install aggregate paths Unit of competency
Replaced By
State Code National Code Title Type
ODU36 AHCLSC208 Install aggregate paths Unit of competency