Unit of competency Outline

Date retreived
22/07/2026 8:40 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install, configure and test an internet protocol network

Install, configure and test an internet protocol network

Unit of competency
National Code
ICTTEN416
State Code
AWG34
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
020113 - Networks And Communications
Original Release Date
05/07/2016
Nominal Hours
45
Description
This unit describes the skills and knowledge required to select network elements to meet client business specifications, ensure interoperability within the network, apply network topologies, protocols and security issues, and troubleshoot when required.It applies to individuals who carry out installation, maintenance and upgrade of information and communications technology (ICT) networks, and are employed by telecommunications or information technology networking provisioning companies.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to install IP network
  • 1.1 Prepare for given work according to relevant legislation, work health and safety (WHS) regulations, codes and standards
  • 1.2 Arrange site access according to required procedure
  • 1.3 Review existing network design documentation to ensure it is current and complete
  • 1.4 Select components and network elements required to be installed to meet the technical requirements
  • 1.5 Contact vendors and service suppliers to obtain specifications and availability of identified components
  • 1.6 Develop plans, with prioritised tasks and contingency arrangements, for installation of components with minimum disruption to client
  • 1.7 Liaise with appropriate person to obtain approval for the plans, including security clearance and timing
2. Install and configure IP network
  • 2.1 Install and configure server hardware and software according to organisational and industry standards, following plans
  • 2.2 Install and configure computer, other hardware and software, according to organisational and industry standards and plans
  • 2.3 Install and configure other software required for the network to operate with security and integrity according to the plan
3. Test and reconfigure IP network
  • 3.1 Test installed software and hardware, utilising available technical tools, to ensure all components are functioning as expected
  • 3.2 Test the network to ensure it is functioning according to specifications
  • 3.3 Resolve problems identified in the modified network
4. Complete documentation and clean worksite
  • 4.1 Complete hardware and asset recording document in line with organisational requirements
  • 4.2 Document installation, boot-up and configuration procedures according to organisational requirements
  • 4.3 Tabulate test results and complete all user reports
  • 4.4 Complete client report and notify of network status
  • 4.5 Clean up and restore worksite to client’s satisfaction
  • 4.6 Secure sign-off from appropriate person
No information
No information
Replaces
State Code National Code Title Type
D3466 ICTTEN4198A Install, configure and test an internet protocol network Unit of competency
Replaced By
State Code National Code Title Type
OBS40 ICTTEN434 Install, configure and test internet protocol networks Unit of competency