Unit of competency Outline

Date retreived
22/07/2026 6:23 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Determine and apply gilding techniques

Determine and apply gilding techniques

Unit of competency
National Code
MSFPF4004
State Code
OAI33
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
22/05/2019
Nominal Hours
80
Description
This unit of competency describes the skills and knowledge required to assess and apply gilding requirements to new picture frames and those requiring repair or restoration.This unit applies to picture framers offering specialised gilding services. They use discretion, judgement and specialised knowledge to select, use and adapt different materials and techniquesNo licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Identify gilding requirements from work order and examination of frame
  • 1.2 Examine frame and identify whether new gilding, preservation or restoration techniques are required
  • 1.3 Identify and follow work health and safety requirements throughout the work
  • 1.4 Select and check tools and equipment for quality, serviceability and safety prior to use
  • 1.5 Identify and assemble gilding materials and any associated finishes
  • 1.6 Plan work sequence based on application techniques required
2. Apply gilding
  • 2.1 Check frame surfaces for contamination and faults prior to finish application
  • 2.2 Check frames for correct preparation and required maintenance of original finishes that require the removal of over painting
  • 2.3 Repair or report surface faults in accordance with workplace procedures
  • 2.4 Complete required composition work in accordance with workplace procedures
  • 2.5 Apply gilding using established techniques in accordance with job requirements and workplace procedures
  • 2.6 Apply required ornamentation in accordance with job requirements and workplace procedures
  • 2.7 Check surface finish against job requirements and rectify any faults to achieve required result
3. Complete work
  • 3.1 Mark completed work for identification and store in accordance with workplace procedures
  • 3.2 Identify and store items for recycling in accordance with workplace procedures
  • 3.3 Clean work area and safely dispose of rubbish
  • 3.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI598 MSFPF4002 Determine and apply gilding techniques Unit of competency
State Code National Code Title Type
J742 MSF40213 Certificate IV in Furniture Design and Technology Qualification