Unit of competency Outline

Date retreived
22/07/2026 9:37 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Determine and apply gilding techniques

Determine and apply gilding techniques

Unit of competency
National Code
MSFPF4002
State Code
WI598
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
20/06/2014
Nominal Hours
80
Description
This unit of competency covers determining the requirements, preparing for and applying gilding techniques to new picture frames and those requiring repair or restoration.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Work to be completed is identified from work instruction, customer request or artwork is assessed as requiring a gilded frame
  • 1.2 Frame requiring gilding is examined to identify whether new gilding, preservation or restoration techniques are required
  • 1.3 Gilding technique or techniques to be applied is determined
  • 1.4 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.5 Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the finishing task in terms of quality, serviceability and safety
  • 1.6 Gilding materials and any associated finishes required are identified and assembled for the gilding task
  • 1.7 Work sequence is planned to suit the job
2 Prepare for gilding
  • 2.1 Frame surfaces are checked for contamination and correct preparation including maintenance of original finishes on historic pieces that require the removal of over painting according to workplace procedures and standards
  • 2.2 Frames with surface or other faults are identified and faults reported or repaired as appropriate
  • 2.3 Techniques for application of materials identified and used according to industry standards and workplace practices
  • 2.4 Faults are identified and workplace procedures for rectification are followed
  • 2.5 Composition work is completed, as required, to meet specifications in accordance with workplace procedures
3 Apply gilding
  • 3.1 Gilding is applied according to job instructions and workplace procedures
  • 3.2 Final finish is checked in accordance with workplace requirements
  • 3.3 Rectification of surface faults are made as required
  • 3.4 Ornamentation is applied, as required, in accordance with job instructions and workplace procedures
  • 3.5 Products are inspected and approved for suitability for further processing with defective frames being handled in accordance with workplace procedures
4 Complete work
  • 4.1 Tools and equipment are cleaned and inspected for serviceable condition and stored appropriately
  • 4.2 Unused material is returned to store in accordance with workplace procedures
  • 4.3 Work area is cleaned and returned to approved condition
  • 4.4 Workplace documentation is completed
No information
No information
Replaced By
State Code National Code Title Type
OAI33 MSFPF4004 Determine and apply gilding techniques Unit of competency
State Code National Code Title Type
J742 MSF40213 Certificate IV in Furniture Design and Technology Qualification