Unit of competency Outline

Date retreived
22/07/2026 5:27 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Make flat patterns for millinery

Make flat patterns for millinery

Unit of competency
National Code
MSTML2002
State Code
BAV17
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030107 - Garment Making
Original Release Date
01/12/2016
Nominal Hours
20
Description
This unit of competency covers the skills and knowledge required to construct flat patterns for millinery using measurements, mathematical calculations and geometry.The unit of competency applies to the construction of flat patterns onto paper or cardboard based on taken and calculated measurements.Work may be conducted in small to large scale enterprises and may involve individual and team activities.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare to make millinery patterns
  • 2.1 Identify pattern pieces and the measurements required for pattern
  • 2.2 Select model to suit design specifications
  • 2.3 Take measurements, make calculated measurements, document and check for accuracy
  • 2.4 Select manual or electronic construction method to suit pattern
  • 2.5 Select and prepare patternmaking tools and equipment
3 Construct millinery pattern
  • 3.1 Construct patterns using millinery flat pattern construction principles
  • 3.2 Apply measurements and calculations to construct pattern
  • 3.3 Check pattern pieces for accuracy, including seam allowances, ease allowance, proportion and seam match
  • 3.4 Make a test toile to check that design requirements are met
  • 3.5 Modify or alter patterns according to results from the test toile
4 Finalise millinery patterns
  • 4.1 Label pattern pieces, including grain lines, notches, pattern information and cutting instructions
  • 4.2 Complete pattern specification sheet according to workplace requirements and procedures
  • 4.3 File final patterns or pass on to the next operation
  • 4.4 Complete all required documentation
No information
No information
Replaces
State Code National Code Title Type
W7409 LMTML2002A Make flat patterns for millinery Unit of competency