Qualification Outline
22/07/2026 7:14 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Millinery
Certificate III in Millinery
MST30316
BDG5
Current
Approved
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 5.00 | 22/12/2022 | Current | Approved |
| 4.00 | 31/01/2020 | Replaced | Approved |
| 3.00 | 25/07/2019 | Replaced | Approved |
| 2.00 | 21/11/2016 | Replaced | Approved |
| 1.00 | 04/07/2016 | Replaced | Approved |
Description
This qualification is intended for those who apply a range of technical skills within a millinery production environment.
No occupational licensing or certification requirements exist at the time of publication.
There are 0 minimum work placement hours required for this unit.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
Schedule
Packaging Rules
To be awarded the MST30316 Certificate III in Millinery, competency must be achieved in nineteen (19) units of competency:- nine (9) core units of competency
- ten (10) elective units of competency.
- a minimum of one (1) unit must be chosen from Group A
- the remaining seven (9) units may be selected from:
- units not previously selected from Group A
- units from Group B
- a maximum of three (3) relevant units from this Training Package, other endorsed Training Packages and accredited courses, where those units are available at Certificate II level (maximum 1 unit), Certificate III level or Certificate IV level (maximum 1 unit).
Units selected from other Training Packages and accredited courses must be relevant to the qualification outcome and not duplicate units available within this qualification.
Note: Where prerequisite units are identified they must be counted in the total number of units required for achievement of the qualification.
1. Core Units
All nine (9) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| BAK44 | MSS402051 | Apply quality standards | 30 | Unit of competency |
| BAV11 | MSTML2008 | Assemble simple blocked millinery components | 90 | Unit of competency |
| BAV12 | MSTML2007 | Block and shape millinery by hand | 30 | Unit of competency |
| AWC20 | MSMSUP102 | Communicate in the workplace | 26 | Unit of competency |
| BAV18 | MSTML2001 | Identify materials used in millinery | 40 | Unit of competency |
| BAV07 | MSTML3004 | Identify performance and handling requirements of millinery materials | 30 | Unit of competency |
| BAV17 | MSTML2002 | Make flat patterns for millinery | 20 | Unit of competency |
| AWC13 | MSMENV272 | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| AWC15 | MSMWHS200 | Work safely | 26 | Unit of competency |
2. Group A Elective Units
A minimum of one (1) unit must be completed.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| BAV05 | MSTML3005 | Assemble complex blocked millinery components | 90 | Unit of competency |
| BAV10 | MSTML3002 | Block and shape complex millinery | 80 | Unit of competency |
| OEZ42 | MSTGN3025 | Draw 3D designs | 60 | Unit of competency |
| OEZ44 | MSTGN3023 | Estimate and cost jobs | 45 | Unit of competency |
| BAV08 | MSTML3001 | Make flat patterns from hat blocks | 40 | Unit of competency |
| BAV06 | MSTML3003 | Make millinery using patterns derived from hat block | 40 | Unit of competency |
| OEZ72 | MSTGN3020 | Market textile products to local outlets | 30 | Unit of competency |
| OBL73 | MSTGN3014 | Organise and plan own work to achieve planned outcomes | 30 | Unit of competency |
| BAW96 | MSTFD3005 | Use skin, fur or leather to create fashion or textile products | 40 | Unit of competency |
3. Group B Elective Units
Up to nine (9) units may be completed.
Please refer to the packaging rules for the full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W372 | LMT30607 | Certificate III in Millinery | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships