Unit of competency Outline

Date retreived
22/07/2026 8:05 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Make millinery with flat pattern components

Make millinery with flat pattern components

Unit of competency
National Code
MSTML2006
State Code
BAV13
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030107 - Garment Making
Original Release Date
01/12/2016
Nominal Hours
20
Description
This unit of competency covers the skills and knowledge required to perform the tasks associated with making or copying millinery from a flat pattern.The unit of competency applies to making millinery using flat pattern components. It involves the use of non-critical fabrics, including natural and synthetic materials.Work may be conducted in small to large scale enterprises and may involve individual and team activities. Work is performed within defined procedures under direct supervision. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare to make millinery
  • 2.1 Confirm pattern requirements and identify construction requirements
  • 2.2 Prepare materials for millinery product
  • 2.3 Check pattern to confirm sizing and make minor adjustments to the pattern, where required
  • 2.4 Check fabric or material for faults to ensure conformance to standards
  • 2.5 Lay up fabric or material for cutting, as required
3 Cut material or fabric to pattern
  • 3.1 Select cutting tools and equipment appropriate for the fabric
  • 3.2 Cut laid-up material or fabric to meet the pattern specifications
  • 3.3 Inspect cut work to ensure it conforms to work specification
  • 3.4 Rectify and report faults, where required
4 Fuse and sew millinery
  • 4.1 Match millinery pieces and sew or fuse to meet the requirements of the pattern specifications
  • 4.2 Assess millinery machine operation in accordance with workplace procedures
  • 4.3 Inspect sewn or fused pieces to confirm quality and conformance to specifications
  • 4.4 Identify faults and take appropriate action to meet quality standards
  • 4.5 Undertake recording and reporting, as required, according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W7417 LMTML2010A Make millinery with flat pattern components Unit of competency