Unit of competency Outline

Date retreived
22/07/2026 7:08 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply vehicle body film wrapping

Apply vehicle body film wrapping

Unit of competency
National Code
AURVTP009
State Code
AWZ43
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
13/07/2016
Nominal Hours
15
Description
This unit describes the performance outcomes required to prepare vehicle body surfaces and apply vinyl film wrapping materials. It involves preparing for the task, selecting and using specialist tools, selecting vinyl film materials, checking vinyl film quality, and completing workplace processes and documentation.It applies to those working in the automotive paint refinishing repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to apply vehicle body film wrapping
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Workplace procedures and vinyl film supplier recommended application methods are accessed and interpreted
  • 1.3 Vinyl film wrapping materials are selected and inspected for quality
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.6 Vehicle panel surface is assessed for quality
  • 1.7 Work is planned to apply body film wrapping, minimise waste, and prevent damage to vehicle
2. Measure, cut and apply vinyl film
  • 2.1 Surface area is measured accurately and patterns are produced
  • 2.2 Vinyl film material is cut according to vinyl pattern specifications and safety and environmental requirements
  • 2.3 Body surface is prepared using vinyl film supplier approved methods, materials and equipment
  • 2.4 Vinyl film wrapping materials are applied according to vinyl film supplier specifications and workplace procedures, and without causing damage to body surface
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF528 AURVTP2009 Apply vehicle body film wrapping Unit of competency
Replaced By
State Code National Code Title Type
ODJ86 AURVTP109 Apply vehicle body film wrapping Unit of competency