Unit of competency Outline

Date retreived
23/07/2026 5:15 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Design and construct ornamental frames

Design and construct ornamental frames

Unit of competency
National Code
MSFPF4001
State Code
WI597
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
20/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
20/06/2014
Nominal Hours
80
Description
This unit of competency covers designing and constructing ornamental frames considering elements and principles of design to maintain/enhance the historic, sentimental or monetary value of artwork.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify design requirements
  • 1.1 Customer requirements relating to the display of the artwork and frame features are determined
  • 1.2 Work area is cleaned and prepared to handle artwork in accordance with workplace standards
  • 1.3 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.4 Workplace quality assurance requirements are recognised and adhered to throughout the work
  • 1.5 Artwork is handled in accordance with industry recognised handling methods and workplace procedures
  • 1.6 Artwork is assessed for colour qualities to identify primary, secondary, tertiary, harmonic and contrasting colours by colour wheel, and the aesthetic/mood evoking nature
  • 1.7 Artwork is assessed against the elements and principles of design and their impact on preservation/restoration and framing selection determined
  • 1.8 Design concept is developed and confirmed with the customer
2 Develop frame design
  • 2.1 Historic, sentimental or monetary value of artwork ascertained through examination, research and/or consultation with customer
  • 2.2 Artwork is assessed to identify any impact preservation or restoration will have on frame design
  • 2.3 Compatibility of framing materials with the artwork is determined from manufacturer and industry information
  • 2.4 Principles of colour design are applied to select mat and framing materials to complement artwork
  • 2.5 A provisional design package is developed for presentation and discussion with customer
  • 2.6 Design package is revised to reflect customer requirements
3 Construct ornamental frame
  • 3.1 Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
  • 3.2 Machinery is used in accordance with workplace procedures throughout the work, including use of personal protective equipment
  • 3.3 Material is cut to size and laid out in the required design
  • 3.4 Specialised/ornamental components are moulded/turned/carved/manufactured in accordance with workplace procedures
  • 3.5 Frame components are finished in compliance with the design specifications and assessed for fit and aesthetic appearance
  • 3.6 Frame is joined to comply with design in accordance with workplace procedures
  • 3.7 Finish to the frame and its fittings is applied to comply with design in accordance with workplace procedures
  • 3.8 Work is checked against required quality standards with any non-conformity being rectified
  • 3.9 Customer endorsement of finished frame is sought and any modifications identified and implemented
4 Complete work
  • 4.1 Scraps and off-cuts are removed for disposal/recycling as required by workplace procedures
  • 4.2 Work area is cleaned and rubbish disposed of as appropriate
  • 4.3 Workplace documentation is completed as required
  • 4.4 Tools, equipment and unused materials are cleaned and stored following workplace procedures
No information
No information
Replaced By
State Code National Code Title Type
OAI34 MSFPF4003 Design and construct ornamental frames Unit of competency
State Code National Code Title Type
J742 MSF40213 Certificate IV in Furniture Design and Technology Qualification