Unit of competency Outline

Date retreived
22/07/2026 7:55 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Design and construct ornamental frames

Design and construct ornamental frames

Unit of competency
National Code
MSFPF4003
State Code
OAI34
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
22/05/2019
Nominal Hours
80
Description
This unit describes the skills and knowledge required to assess ornamental frame design requirements and then construct ornamental frames including those requiring ornate or elaborate embellishment.This unit applies to picture framers offering ornamental frame design and construction services. They use discretion, judgement and specialised knowledge to select, use and adapt different materials and techniques.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for design assessment
  • 1.1 Clear and prepare work area for inspection of artwork in accordance with workplace standards
  • 1.2 Receive and handle artwork in accordance with industry recognised handling methods and workplace procedures
  • 1.3 Obtain initial information about historic, monetary or sentimental value from the customer
  • 1.4 Seek information from customer in relation to expectations and parameters of ornamental framing
2. Assess restoration and conservation requirements
  • 2.1 Establish the period and quality of artwork, and its historic or monetary value, through examination
  • 2.2 Identify artwork composition and production techniques and associated restoration or conservation requirements
  • 2.3 Determine limitations and options for ornamental framing
  • 2.4 Identify the need for any specialised expertise in assessing, restoring or framing the artwork
3. Assess aesthetic requirements
  • 3.1 Assess artwork against the elements and principles of design and their impact on framing selection
  • 3.2 Seek and use information about customer preferences and where the item will be placed for any impact on design requirements
4. Develop frame design
  • 4.1 Confirm compatibility of framing materials with the artwork from manufacturer and industry information
  • 4.2 Select framing materials that complement artwork based on the elements and principles of design and conservation needs
  • 4.3 Present design options to the customer and make informed recommendations based on customer and artwork needs
  • 4.4 Revise design to reflect customer requirements
  • 4.5 Agree and accurately document customer requirements for final design
5. Construct ornamental frame
  • 5.1 Identify and follow work health and safety requirements throughout the work
  • 5.2 Select and check tools, equipment and materials for quality, serviceability and safety prior to use
  • 5.3 Measure and cut material to size and lay out in the required design
  • 5.4 Create specialised and ornamental components using established techniques in accordance with workplace procedures
  • 5.5 Finish frame components in accordance with design specifications and assess for fit and aesthetic appearance
  • 5.6 Join frame to comply with design
  • 5.7 Inspect completed work for compliance with quality and work order requirements and rectify any deficiencies
6. Complete work
  • 6.1 Mark completed work for identification and store in accordance with workplace procedures
  • 6.2 Identify and store items for recycling in accordance with workplace procedures
  • 6.3 Clean work area and safely dispose of rubbish
  • 6.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI597 MSFPF4001 Design and construct ornamental frames Unit of competency
State Code National Code Title Type
J742 MSF40213 Certificate IV in Furniture Design and Technology Qualification