Unit of competency Outline

Date retreived
22/07/2026 6:46 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform welds to code standards using manual metal arc welding process

Perform welds to code standards using manual metal arc welding process

Unit of competency
National Code
MEM05046
State Code
OAW75
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
31/03/2021
View on TGA
State Implementation and Classification
Approved Date
18/04/2021
Field of Education
030711 - Boilermaking And Welding
Original Release Date
18/04/2021
Nominal Hours
54
Description
This unit of competency defines the skills and knowledge required to prepare and produce welds to code standards using manual metal arc welding (MMAW) on a range of materials. Butt and fillet welds in the flat, horizontal, vertical and overhead positions would be applied to meet AS 1210-2010 Pressure vessels, AS 4041-2006 (R2016) Pressure piping, and American Society of Mechanical Engineers (ASME) IX or equivalent. This unit, together with unit MEM05026 Apply welding principles, may satisfy the requirements of AS 1796-2001 (R2016) Certification of welders and welding supervisors, Certificates 1, 1E, 3 and 3E.Where advanced manual thermal cutting, gouging and shaping is required unit MEM05008 Perform advanced manual thermal cutting, gouging and shaping should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: BUnit Weight: 6
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare welding materials and equipment for MMAW welding to code standard
  • 2.1 Prepare materials to produce weld to code standard
  • 2.2 Perform routine maintenance on welding equipment
  • 2.3 Set up welding equipment
3 Weld joints using MMAW to procedure specifications
  • 3.1 Weld materials in accordance with weld procedure specification
  • 3.2 Rectify discontinuities to ensure compliance to code requirements
  • 3.3 Maintain weld records according to SOPs
No information
No information
Replaces
State Code National Code Title Type
W5321 MEM05046B Perform welds to code standards using manual metal arc welding process Unit of competency
Replaced By
State Code National Code Title Type
OEU52 MEM05083 Perform welds to code standards using manual metal arc welding process Unit of competency