Unit of competency Outline

Date retreived
23/07/2026 5:17 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Manufacture textile structures

Manufacture textile structures

Unit of competency
National Code
MSTTF3007
State Code
BAU45
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
01/12/2016
Nominal Hours
90
Description
This unit of competency covers the skills and knowledge required to fabricate and install outdoor protective textile covers to suit a range of purposes. The fabricated product may be designed to standard or customised requirements to fit a vehicle, building or frame structure.The unit of competency applies to the design, marking out, manufacturing and fitting of the finished textile product. Discretion and judgement may be required, for both self and others, in planning and selecting processes, procedures or outcomes.Work may be conducted in a variety of environments, such as workshops and various on-site locations and may also involve individual and team activities. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Set up and plan job sequence
  • 2.1 Plan task sequence and estimate time required to complete operations
  • 2.2 Consult with supervisor or client to confirm and clarify production requirements
  • 2.3 Determine materials, hardware and attachments required and calculate quantities
  • 2.4 Determine and prepare appropriate workspace to conduct production process
  • 2.5 Identify and set up all appropriate tooling and equipment
3 Carry out fabrication process
  • 3.1 Operate equipment according to relevant SOPs
  • 3.2 Lay out, mark and cut material to suit design and shape of product
  • 3.3 Fabricate product using sewing, welding or gluing
  • 3.4 Fit required attachments according to job specifications
  • 3.5 Inspect product for quality or defects prior to installation
  • 3.6 Complete work systematically with attention to detail without damage to goods and equipment
4 Fit or install fabricated product
  • 4.1 Set up appropriate installation tooling and equipment
  • 4.2 Install product according to job specifications
  • 4.3 Inspect finished product to identify and make good any defects or minor adjustments
  • 4.4 Clean and restore workspace, tools and equipment and maintain records, according to workplace procedures
  • 4.5 Comply with workplace procedures relating to environmental protection, waste disposal, pollution control and recycling
No information
No information
Replaced By
State Code National Code Title Type
OEZ27 MSTTF3013 Construct manufactured textile products Unit of competency