Unit of competency Outline

Date retreived
22/07/2026 1:07 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Deliver concrete to site

Deliver concrete to site

Unit of competency
National Code
MSMPMC322
State Code
OAE97
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
22/10/2018
View on TGA
State Implementation and Classification
Approved Date
21/05/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
21/05/2019
Nominal Hours
30
Description
This unit describes the skills and knowledge required to deliver concrete to site using an agitator or similar.This unit applies to operators who are required to take responsibility for own outputs and follow established procedures to safely drive and position the agitator truck; load agitator; mix and discharge concrete on site and communicate with customers. Operators are also required to work autonomously and apply their own judgement to interpret information; monitor processes; identify and address routine and non-routine problems and control hazards. This unit applies to an individual working independently and with frequent contact with the base plant personnel.The operator is required to hold a current driver’s licence appropriate to the agitator truck as required by local regulations. Relevant legislation, industry standards and codes of practice within Australia must also be applied.
Notes
Elements and Performance Criteria
1. Load agitator
  • 1.1 Check job requirements
  • 1.2 Position agitator for loading
  • 1.3 Load agitator with correct concrete batch
  • 1.4 Check and action any special requirements
  • 1.5 Check that slump is to specification and make necessary adjustments
2. Deliver concrete
  • 2.1 Deliver concrete without delay
  • 2.2 Position vehicle or agitator as required by safety needs and if practical customer requirements
  • 2.3 Report breakdowns or lengthy delays en route to relevant person
  • 2.4 Maintain product quality as per requirements and procedures
3. Conform to site protocols
  • 3.1 Check access to site with customer
  • 3.2 Assess site conditions and enter in a manner suited to the conditions, load and site requirements
  • 3.3 Mix concrete on site according to quality requirements
  • 3.4 Discharge concrete as required by customer
  • 3.5 Wash down chutes and agitator in the area designated by the customer
  • 3.6 Complete all records
4. Rectify routine problems
  • 4.1 Identify and rectify faults and equipment failure
  • 4.2 Maintain records and log books of equipment operations
  • 4.3 Identify non-routine problems and report to designated person
5. Control hazards
  • 5.1 Identify concrete delivery hazards
  • 5.2 Assess the risks arising from those hazards
  • 5.3 Implement measures to control those risks
No information
No information
Replaces
State Code National Code Title Type
BAH36 PMC552061 Deliver concrete to site Unit of competency