Qualification Outline
22/07/2026 5:48 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Manufactured Mineral Products
Certificate III in Manufactured Mineral Products
MSM30325
BTR4
Current
Pending
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 03/12/2025 | Current | Pending |
Description
This qualification reflects the role of workers who perform a range of operations to directly produce manufactured mineral products for industry, including cement, precast concrete, pre-mixed concrete, quarry and asphalt.
The worker will be able to work independently and to apply theoretical and technical knowledge and well-developed skills to undertake operations and exercise judgement in areas such as start-up and shutdown procedures and quality assurance.
The worker will be able to apply product and process knowledge to anticipate and solve a range of routine and non-routine problems. This includes developing solutions to new problems which do not have a known or recorded solution in procedures.
There are 0 minimum work placement hours required for this unit.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
Schedule
Packaging Rules
Total number of units = Eighteen (18)- five (5) core units
- thirteen (13) elective units, consisting of:
- a maximum of one (1) unit from Group A Measurements
- up to four (4) units from any endorsed Training Package or accredited course - these units must be relevant to the work outcome
All electives chosen must contribute to a valid, industry-supported vocational outcome.
Any combination of electives that meets the rules above may be selected for the award of MSM30325 Certificate III in Manufactured Mineral Products.
Where appropriate, electives may be selected to achieve specialisations as follows:
- for the award of MSM30325 Certificate III in Manufactured Mineral Products (precast concrete), at least 4 units must be selected from Group B.
Units of competency that contain pre-requisites are identified within the Qualification Packaging Rules on the training.gov.au (TGA) website.
1. Core Units
All units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AWC36 | MSMSUP100 | Apply workplace context to own job | 26 | Unit of competency |
| AWC33 | MSMSUP101 | Clean workplace or equipment | 26 | Unit of competency |
| AWC20 | MSMSUP102 | Communicate in the workplace | 26 | Unit of competency |
| AWC13 | MSMENV272 | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| AWC15 | MSMWHS200 | Work safely | 26 | Unit of competency |
2. Elective Units - Group A: Measurements
A maximum of one (1) unit from Group A may be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AWC63 | MSMOPS101 | Make measurements | 20 | Unit of competency |
| AXN54 | PMAOPS101 | Read dials and indicators | 15 | Unit of competency |
3. Elective units - Group B: Precast concrete
To be awarded MSM30325 Certificate III in Manufactured Mineral Products (precast concrete), at least 4 units must be selected from Group B.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OFH69 | MSMPMC334 | Assemble, use and maintain moulds in precast concrete manufacture | Unit of competency | |
| OFH71 | MSMPMC336 | Cast, finish and cure precast concrete products | Unit of competency | |
| OFH68 | MSMPMC335 | Fabricate, assemble and place reinforcement in precast concrete products | Unit of competency | |
| OFH67 | MSMPMC333 | Meet compliance and quality requirements in precast concrete manufacture | Unit of competency | |
| OFH72 | MSMPMC337 | Prestress concrete in precast elements | Unit of competency |
4. Elective Units - Group C
Up to thirteen (13) units may be completed from Group C.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| BEA6 | MSM30318 | Certificate III in Manufactured Mineral Products | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships