Unit of competency Outline

Date retreived
22/07/2026 8:36 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Machine-cut reinforcement materials

Machine-cut reinforcement materials

Unit of competency
National Code
CPCCSF2006
State Code
OCN51
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
030717 - Plant And Machine Operations
Original Release Date
01/06/2021
Nominal Hours
16
Description
This unit specifies the skills and knowledge required to machine-cut reinforcement material components that form part of the construction process. It includes preparing and planning for the work, setting up the machine, cutting the reinforcing materials and completing clean-up activities.It applies to those who work under the direction of more experienced workers to cut reinforcement materials with machine-cutting equipment for a construction project.Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare to machine-cut reinforcement materials.
  • 1.1 Read work order and associated documentation and clarify work tasks with relevant persons.
  • 1.2 Plan all work to comply with relevant legislation, regulations, standards, codes, work health and safety (WHS), environmental and workplace requirements.
  • 1.3 Identify hazards and determine risk controls.
  • 1.4 Select cutting machine, tools and equipment, check for serviceability and rectify or report any faults.
2 Set up work area to machine-cut reinforcement materials.
  • 2.1 Erect required safety signage and barricades and fit personal protective equipment (PPE).
  • 2.2 Conduct measurements and select cutting method in accordance with task specification and site conditions.
  • 2.3 Clean area of flammable material and erect barriers to contain waste material from cutting process.
  • 2.4 Provide a secure and safe work environment with stable base and platform for the reinforcing material.
  • 2.5 Set up cutting machine for operation in accordance with task specifications and manufacturer requirements.
3 Machine-cut reinforcement materials.
  • 3.1 Operate cutting machine safely in accordance with manufacturer and workplace requirements.
  • 3.2 Cut or dock reinforcement steel to prescribed lengths and configurations in accordance with task specifications.
  • 3.3 Cut fabric reinforcement to ensure allowances for element penetrations.
  • 3.4 Stack and bundle cut lengths to be included in reinforcing layout.
4 Clean up.
  • 4.1 Clear work area and dispose of, reuse or recycle materials in accordance with regulatory and workplace requirements.
  • 4.2 Clean, check, maintain and store tools and equipment in accordance with manufacturer and workplace requirements.
No information
No information
Replaces
State Code National Code Title Type
W9506 CPCCSF2006A Machine cut reinforcement materials Unit of competency
State Code National Code Title Type
BTR4 MSM30325 Certificate III in Manufactured Mineral Products Qualification
BGC4 CPC31120 Certificate III in Steelfixing Qualification