Unit of competency Outline

Date retreived
22/07/2026 2:08 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair and replace telecommunications network hardware

Repair and replace telecommunications network hardware

Unit of competency
National Code
ICTTEN307
State Code
AWD51
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
2.00
Current Release Date
30/08/2019
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
60
Description
This unit describes the skills and knowledge required to fix and reinstate equipment in switching, transmission and fixed and mobile radio networks; including the various transmission path components, such as cable, optical fibre, radio, microwave and satellite.It applies to individuals working as field officers, technicians or technical supervisors for carriers, or other service providers. It also applies to work performed under direction of the Network Operations Centre (NOC), where control of the network is coordinated.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for hardware repair and replacement
  • 1.1 Obtain relevant legislation, codes, regulations and standards for the given work
  • 1.2 Discuss and record details of hardware to be repaired or replaced, and proposed work schedule with the appropriate person at NOC
  • 1.3 Work safely according to relevant safety legislation and company work practices, identifying hazards and using personal protective equipment
  • 1.4 Obtain appropriate replacement hardware and associated documentation
  • 1.5 Inspect network and determine need for repair task
  • 1.6 Obtain tools and check they are in good working order
  • 1.7 Undertake an impact risk assessment of the hardware replacement with the NOC, and prepare for contingencies using contingency plan
2. Rectify fault by replacing hardware
  • 2.1 Replace equipment as instructed by the NOC following anti- static precautions in the case of sensitive electronic equipment and work health and safety (WHS) and environmental requirements
  • 2.2 Inform NOC if problems occur with hardware replacement so escalation may commence and contingency plan initiated
  • 2.3 Test replacement hardware to ensure satisfactory functionality
3. Clean up worksite and complete administrative work
  • 3.1 Remove waste and debris from worksite and dispose of according to environmental requirements and restore work area to NOC satisfaction
  • 3.2 Recover faulty equipment and return to appropriate point for disposal or refurbishment
  • 3.3 Complete documentation, update fault records and make recommendations according to the enterprise quality assurance system
  • 3.4 Notify appropriate person at the NOC of job completion and obtain sign-off
No information
No information
Replaces
State Code National Code Title Type
D3449 ICTTEN3089A Repair and replace telecommunications network hardware Unit of competency