Unit of competency Outline

Date retreived
22/07/2026 2:08 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service air compressors and air lines

Service air compressors and air lines

Unit of competency
National Code
AURVTN030
State Code
AWZ72
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030701 - Mechanical Engineering
Original Release Date
13/07/2016
Nominal Hours
16
Description
This unit describes the performance outcomes required to service air compressors, pressure regulators, water traps, filters and air lines. It involves cleaning and replacing filters, making necessary adjustments, and completing workplace processes and documentation as part of the day-to-day maintenance of the system.It applies to those working in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to service air compressor
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Inspection and servicing procedures and information are sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Service air compressor and tank
  • 2.1 Service and adjustments of air compressor and tank are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to system or components
  • 2.2 Post-service testing is carried out according to workplace procedures
3. Service pressure regulator, filter and air line
  • 3.1 Service and adjustments of pressure regulator, filter and air line are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to system or components
  • 3.2 Post-service testing is carried out according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and air compressor system is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF495 AURVTN2030 Service air compressors and air lines Unit of competency