Unit of competency Outline

Date retreived
22/07/2026 1:51 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Modify and repair chassis and frames

Modify and repair chassis and frames

Unit of competency
National Code
AUMGTY003
State Code
WH983
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030509 - Automotive Body Construction
Original Release Date
11/03/2014
Nominal Hours
48
Description
This unit describes the performance outcomes required to modify, repair and align chassis and frame components.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist level.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Inspect vehicle
  • 1.1 Inspection activities are carried out according to workplace procedures
  • 1.2 Chassis or frame is measured and inspected to determine modification or repair requirements
  • 1.3 Inspection report and work plan are prepared during inspection
2. Modify, repair and align chassis or components
  • 2.1 Vehicle specifications are identified and interpreted according to original equipment manufacturer (OEM) specifications and regulatory requirements
  • 2.2 Tools and equipment are selected and checked for correct operation, and identified faults reported
  • 2.3 Chassis or frame is modified or repaired and then aligned according to job sheet and work order
3. Complete work processes
  • 3.1 Completed work is checked against job sheet and OEM specifications
  • 3.2 Work areas, tools and equipment are cleaned and stored according to workplace procedures
  • 3.3 Work forms and final inspection reports are completed and submitted to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
WE183 AUMGTY3003 Modify or rectify chassis and frame and associated components Unit of competency