Unit of competency Outline

Date retreived
22/07/2026 7:44 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Semi-automatically produce complex screen prints

Semi-automatically produce complex screen prints

Unit of competency
National Code
ICPSCP3730
State Code
OBQ60
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
50
Description
This unit describes the skills and knowledge required to produce complex screen prints of two or more colours using semi-automatic machines.It applies to individuals working in the printing and graphic arts industry who may have to set up and operate semi-automatic screen printing machines. They may have to provide leadership and guidance to others and have some limited responsibility for the output of others.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Check substrate against job specifications and report and rectify any irregularities or inconsistencies
  • 1.2 Adjust substrate position and stencil registration
  • 1.3 Apply ink to screen in quantity required for screen size
  • 1.4 Mix colour and ink and check against job specifications
2. Prepare for production run
  • 2.1 Run off proof print and check for colour, strength, registration, adhesion, clarity, gloss level, drying or curing, artwork detail and other technical requirements according to job specifications, and make adjustments as required
  • 2.2 Seek approval to commence production from designated personnel
  • 2.3 Set up belt speed and energy and adjust printing speeds according to job requirements
3. Run job and monitor print quality
  • 3.1 Operate equipment to produce screen print according to job specifications and adjust production speed as required
  • 3.2 Evaluate print quality throughout production run and adjust as required
  • 3.3 Monitor and adjust curing and drying according to manufacturer specifications
  • 3.4 Identify and report problems in machine operation according to enterprise procedures
4. Stack production output
  • 4.1 Confirm drying and curing of output prior to stacking
  • 4.2 Check job status and progress against job specifications and make adjustments as required
5. Shut down machine
  • 5.1 Remove and clean excess ink, screens, squeegees and flood coaters according to work health and safety (WHS) requirements and manufacturer specifications
  • 5.2 Remove solid and liquid waste from operating area and recycle and dispose of, as required, according to regulatory requirements and enterprise procedures
  • 5.3 Clean equipment and surrounding areas according to manufacturer specifications and enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
AUN56 ICPSCP373 Semi-automatically produce complex screen prints Unit of competency
State Code National Code Title Type
BFB8 ICP31220 Certificate III in Printing Qualification