Unit of competency Outline

Date retreived
22/07/2026 1:05 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Finish and paint vehicle body and part surfaces

Finish and paint vehicle body and part surfaces

Unit of competency
National Code
AUMGTP001
State Code
WH965
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
11/03/2014
Nominal Hours
24
Description
This unit describes the performance outcomes required to finish and paint vehicle body and part surfaces.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a production worker level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for work processes
  • 1.1 Work orders, instructions, reports and quality requirements are obtained and confirmed
  • 1.2 Spray booths, and hand and air tools are selected and checked for correct operation and faults are rectified or reported
  • 1.3 Paint materials are identified and selected from job specifications
2. Prepare surface for painting
  • 2.1 Workplace procedures are identified and followed
  • 2.2 Surfaces are cleaned, degreased and prepared according to workplace procedures
  • 2.3 Final finishing is performed on components and panel surfaces to workplace standards
  • 2.4 Reject components and surfaces are identified, recorded and reported for rework or scrap according to workplace procedures
3. Prime painted surfaces
  • 3.1 Paint materials are mixed and applied according to workplace procedures
  • 3.2 Painted surfaces are finished to workplace quality standard
  • 3.3 Reject paintwork is identified, recorded and reworked according to workplace procedures
4. Complete work processes
  • 4.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures
  • 4.2 Tools and equipment are cleaned, checked and stored according to workplace procedures
  • 4.3 Faulty equipment is tagged and reported to supervisor
  • 4.4 Workplace documentation is completed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE165 AUMGTP3001 Finish surfaces for painting Unit of competency