Unit of competency Outline

Date retreived
23/07/2026 10:21 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Ride courier/delivery bicycle

Ride courier/delivery bicycle

Unit of competency
National Code
TLIC1013
State Code
AVK15
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
19/10/2015
View on TGA
State Implementation and Classification
Approved Date
23/02/2016
Field of Education
030515 - Automotive Vehicle Operations
Original Release Date
23/02/2016
Nominal Hours
20
Description
This unit involves the skills and knowledge required to ride a courier or delivery bicycle while safely carrying loads. It includes carrying out pre-operational checks of the bicycle; systematically, safely and efficiently controlling all functions; and effectively managing hazardous situations. Work is generally performed with limited or minimum supervision, with full accountability and responsibility for self in achieving the prescribed outcome.Work must be carried out in accordance with the regulations/permit requirements of the relevant state/territory roads and traffic authority pertaining to the riding of the bicycle on public roads.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Inspect bicycle for operational capability
  • 1.1 Work area is checked to ensure operational checks of bicycle may be conducted safely
  • 1.2 Bicycle is checked prior to operation to ensure it is free from damage that may limit operational capability, in accordance with manufacturer safety checks, specifications and workplace procedures
  • 1.3 Component operation is tested in accordance with manufacturer specifications and workplace procedures
  • 1.4 Warning systems are checked for operational effectiveness
  • 1.5 Air pressure and lubrication are checked against specifications
  • 1.6 Appropriate products are used to maintain specified levels as required
  • 1.7 Faults are identified and assessments are made of their potential affect on the operation of the bicycle for the required work, and are reported to appropriate personnel for rectification
  • 1.8 Personal protective equipment is identified, worn and adjusted to meet recommended Australian Standards, legislative, regulatory and policy requirements
2 Ride bicycle
  • 2.1 Road area is checked for hazards prior to and during journey
  • 2.2 Bicycle is steered, manoeuvred, positioned and stopped in accordance with traffic regulations, manufacturer instructions and workplace policy
  • 2.3 Gears are managed to ensure efficiency and performance, and to minimise gear damage and fatigue
  • 2.4 Hazards are identified and/or anticipated and avoided or controlled through defensive riding
  • 2.5 Bicycle is parked and secured in accordance with manufacturer specifications, traffic regulations and workplace procedures
  • 2.6 Bicycle is securely loaded and manoeuvred in accordance with required precautions related to characteristics of the load and/or relevant government regulations pertaining to special loads
  • 2.7 Required signs or indicators are fixed to the bicycle
3 Monitor traffic and road conditions
  • 3.1 Most efficient route of travel is taken through monitoring and anticipating traffic flows and conditions, road standards and other factors likely to cause delays or route deviations
  • 3.2 Traffic and road conditions are constantly monitored and acted upon to enable safe operation and to ensure no injury to people or damage to property, equipment, loads and facilities
4 Monitor and maintain bicycle performance
  • 4.1 Performance of bicycle operation is monitored during use
  • 4.2 Defective or irregular performance or malfunctions are reported to appropriate authority
  • 4.3 Records are maintained/updated and information is processed in accordance with workplace procedures
  • 4.4 Clear reference in reports is made to items that may affect future efficient use and/or safety of equipment
No information
No information
Replaces
State Code National Code Title Type
D5013 TLIC1013A Ride courier/delivery bicycle Unit of competency
Replaced By
State Code National Code Title Type
ODP73 TLIPC0004 Complete courier operations Unit of competency
State Code National Code Title Type
AZQ2 TLI21216 Certificate II in Driving Operations Qualification
AWP9 TLI11215 Certificate I in Warehousing Operations Qualification