Unit of competency Outline

Date retreived
22/07/2026 7:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Launch and recover vessels using a trailer

Launch and recover vessels using a trailer

Unit of competency
National Code
AURRGA001
State Code
AXB65
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to use a trailer to launch and recover a motor-driven vessel in an estuary or seaway. It involves preparing for the task, conducting a vessel pre-launch safety inspection, launching the vessel into the water, and recovering the vessel from the water.It applies to those working in the marine service and repair industry. The vessels are those up to 10 metres in length with a maximum beam of 2.5 metres.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Prepare to launch vessel
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Tools and equipment are selected and checked for serviceability
  • 1.3 Weather, tides and launch site are checked for safe launch conditions
  • 1.4 Hazards associated with the work are identified and risks are managed
2. Conduct pre-launch safety inspection
  • 2.1 Vessel safety equipment is audited
  • 2.2 Vessel systems and components are checked for seaworthiness, and compliance with manufacturer specifications and applicable state and territory regulations
  • 2.3 Trailer is checked for compliance with manufacturer specifications and applicable state and territory regulations
  • 2.4 Systems and components that fail the vessel and trailer check are recorded, and supervisor and owner are notified
3. Launch vessel
  • 3.1 Vehicle is manoeuvred to position trailer in suitable depth of water on launch site according to manufacturer and workplace procedures and safety requirements
  • 3.2 Vessel is tethered to trailer using suitable rope and knots
  • 3.3 Winch mechanism is operated, safety chain removed, and vessel allowed to slide from trailer according to manufacturer and workplace procedures, safety requirements, and state and territory marine safety laws
  • 3.4 Vessel is moved from launch site to safe area in water according to state and territory marine safety laws
  • 3.5 Vehicle and trailer are parked in a suitable area
4. Recover vessel
  • 4.1 Vehicle is manoeuvred to position trailer in suitable depth of water on launch site according to state and territory marine safety laws
  • 4.2 Detachable trailer fixtures are removed and trailer retrieval guide poles fitted as required
  • 4.3 Vessel is manoeuvred into recovery area and aligned with trailer guides and rollers
  • 4.4 Vessel is tethered to trailer using suitable rope and knots
  • 4.5 Winch mechanism is operated and vessel is pulled on to trailer without causing damage to vessel or trailer
  • 4.6 Vessel is secured to trailer according to manufacturer specifications and applicable state and territory regulations
No information
No information
Replaces
State Code National Code Title Type
WF312 AURRGA3001 Launch and recover a vessel using a trailer Unit of competency