Unit of competency Outline

Date retreived
22/07/2026 6:10 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform mechanical cutting

Perform mechanical cutting

Unit of competency
National Code
AUMGTW002
State Code
WH976
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
12/12/2018
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030713 - Metal Casting And Patternmaking
Original Release Date
11/03/2014
Nominal Hours
28
Description
This unit describes the performance outcomes required to prepare and operate mechanical cutting equipment.It involves the application of skills and knowledge at a production worker level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Identify job requirements and specifications from work order and drawings
  • 1.2 Select appropriate cutting equipment, inspecting for safe operation and identifying faults
  • 1.3 Set and adjust cutting equipment for use, according to material type and job specifications
  • 1.4 Identify cutting list from work plan and plan cutting processes to ensure minimal waste
2. Undertake cutting processes
  • 2.1 Identify and use personal protective equipment (PPE) according to workplace procedures and work health and safety (WHS) requirements
  • 2.2 Check equipment safety stops and guards, adjusting if necessary
  • 2.3 Operate equipment according to manufacturer instructions and workplace procedures
  • 2.4 Inspect and cut material according to job specifications
  • 2.5 Identify cutting defects and take corrective action
3. Complete work processes
  • 3.1 Clean and maintain work area and equipment according to workplace procedures
  • 3.2 Identify, tag and report faulty cutting equipment
  • 3.3 Complete cutting list and give to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
WE176 AUMGTW3002 Conduct mechanical cutting operations Unit of competency