Unit of competency Outline

Date retreived
22/07/2026 6:10 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Program and set up CNC manufacturing cell

Program and set up CNC manufacturing cell

Unit of competency
National Code
MEM07023
State Code
OAW32
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
31/03/2021
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030707 - Metal Fitting, Turning And MacHining
Original Release Date
Nominal Hours
54
Description
This unit of competency defines the skills and knowledge required to program operations, set up and test the operation of a cell and extends to computer numerically controlled (CNC) machines and associated integrated equipment/robots used in flexible manufacturing cell and other advanced operations. Where additional machining skills in excess of unit MEM07005 Perform general machining are required appropriate units should also be selected. Where the selection and use of precision mechanical measurement is required unit MEM12003 Perform precision mechanical measurement should also be selected.Where the selection and use of power tools/hand held operations is required unit MEM18002 Use power tools/hand held operations should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication. Band: BUnit Weight: 6
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Program operations
  • 2.1 Interpret engineering drawings and manufacturing specifications to determine required equipment
  • 2.2 Program equipment/cell schedule
  • 2.3 Link controllers for integration
3 Set up cell
  • 3.1 Configure manufacturing cell machines and equipment to meet production specifications
  • 3.2 Install tooling and work holding devices and adjust to meet specifications
  • 3.3 Operate cell and adjust to produce components to specification
No information
No information
Replaces
State Code National Code Title Type
W5368 MEM07023C Program and set up CNC manufacturing cell Unit of competency
State Code National Code Title Type
BEJ8 MEM40119 Certificate IV in Engineering Qualification
BEK0 MEM50119 Diploma of Engineering - Advanced Trade Qualification