Unit of competency Outline

Date retreived
22/07/2026 6:45 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install metal structures and features

Install metal structures and features

Unit of competency
National Code
AHCLSC321
State Code
ODU90
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
15/02/2022
View on TGA
State Implementation and Classification
Approved Date
31/05/2022
Field of Education
040301 - Building Science And Technology
Original Release Date
31/05/2022
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to install metal structures and features as a component of landscape project works, including preparing for work, setting out site, preparing and cutting metal components, assembling and erecting structure, checking and cleaning up site.The unit applies to individuals who install metal structures and features under broad direction, and take responsibility for their own work and for the quality of the work of others.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare work
  • 1.1 Interpret site plans and specifications
  • 1.2 Identify potential hazards and risks, and implement safe working practices to manage risks
  • 1.3 Check quantity and quality of materials
  • 1.4 Select tools and equipment required for installation work and check for serviceability
  • 1.5 Select, fit, use and maintain personal protective equipment (PPE) applicable to the task
2. Set out the site for the structure
  • 2.1 Determine, locate and mark out services from site plan
  • 2.2 Mark out position of structure or feature
  • 2.3 Establish profiles to conform to nominated tolerances
  • 2.4 Excavate and prepare footings according to type of structure to be erected
3. Prepare and cut metal components
  • 3.1 Lay components out for assembly
  • 3.2 Mark the length of components and positions of joins
  • 3.3 Cut, check and join components in preparation for joining and assembly
4. Assemble and erect structure
  • 4.1 Fix, join or assemble metal components into position and fix into place
  • 4.2 Install remaining components and fix into position
  • 4.3 Finish off structure to ensure all components are secure and complete
  • 4.4 Apply coatings
5. Check quality of work and clean-up site
  • 5.1 Inspect quality of finished works to ensure required standard has been achieved
  • 5.2 Clean debris from structure and site
  • 5.3 Dispose of or recycle waste material from site
  • 5.4 Store unused metal components for future re-use
  • 5.5 Clean, maintain and store tools and equipment
  • 5.6 Identify and report unserviceable tools and equipment according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
BAO56 AHCLSC308 Install metal structures and features Unit of competency