Unit of competency Outline

Date retreived
22/07/2026 2:47 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate and control wastewater processes

Operate and control wastewater processes

Unit of competency
National Code
NWPTRT061
State Code
AVY03
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
07/12/2015
View on TGA
State Implementation and Classification
Approved Date
15/04/2016
Field of Education
030907 - Water And Sanitary Engineering
Original Release Date
15/04/2016
Nominal Hours
45
Description
This unit of competency describes the skills required to operate and control a wastewater treatment plant and report on system performance and process quality control. The ability to operate wastewater treatment processes to ensure that wastewater disposal or re use meets state or territory licensing requirements is essential to performance.This unit applies to those working as operational staff in wastewater treatment plants with responsibility for the practical and safe operation of plant, equipment and processes.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to, particularly those relating to WHS.Those undertaking this unit would work under supervision, performing routine tasks within a familiar context.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for work
  • 1.1 Determine work requirements from work specifications and plans.
  • 1.2 Select and check equipment required to meet safety requirements of task and site.
  • 1.3 Select, fit and use safety equipment including personal protective equipment.
2. Operate and control processes
  • 2.1 Carry out routine plant inspections according to the type of plant.
  • 2.2 Identify and report process faults and the operational condition of the plant.
  • 2.3 Collect samples and conduct standard tests.
  • 2.4 Carry out basic adjustments to improve process performance.
3. Complete documentation
  • 3.1 Collect, record and complete process data.
  • 3.2 Identify data that falls outside normal parameters and report for further action.
No information
No information
Replaced By
State Code National Code Title Type
OBN59 NWPTRT027 Monitor and operate wastewater treatment processes Unit of competency