Unit of competency Outline
Date retreived
23/07/2026 8:01 AM AWST
23/07/2026 8:01 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Repair vehicle structural damage by riveting
Repair vehicle structural damage by riveting
Unit of competency
National Code
AURVTN019
AURVTN019
State Code
AWZ76
AWZ76
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030509 - Automotive Body Construction
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to repair a vehicle’s structural damage using riveting techniques. It involves preparing for the task, selecting and using specialist tools and equipment, repairing or replacing riveted panels, including straightening, realignment and attachment procedures, finishing repair to pre-paint condition, and completing workplace processes and documentation.It applies to those working in the automotive body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to repair riveted structural damage
- 1.1 Job requirements are determined from workplace instructions
- 1.2 Structural repair and riveting information is accessed and interpreted from original equipment manufacturer (OEM) or authorised agency’s specifications and workplace procedures
- 1.3 Materials for repair are selected and checked for quality
- 1.4 Hazards associated with the work are identified and risks are managed
- 1.5 Tools and equipment are selected and checked for serviceability
- 1.6 Work area is prepared and work is planned to minimise waste and use time efficiently
2. Carry out structural riveting procedures
- 2.1 Components are repaired or replaced according to OEM or approved agency’s riveting procedures, and equipment, safety and environmental requirements
- 2.2 Assistance is sought from authorised personnel where straightening, realigning and riveting of components disturb vehicle trim or electrical, mechanical or air conditioning systems
3. Carry out body measuring procedures
- 3.1 Repaired and riveted structural components are measured using workplace instructions and OEM or authorised agency’s approved methods and equipment
- 3.2 Measuring activities are carried out and measurements are compared with OEM or authorised agency’s specifications and workplace procedures
4. Complete work processes
- 4.1 Final inspection is made to ensure work meets workplace expectations and manufacturer specifications, and components are presented ready for painting
- 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF505 | AURVTN3019 | Repair and replace structural damage by riveting | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OCL98 | AURVTN119 | Repair vehicle structural damage by riveting | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAB7 | AUR32116 | Certificate III in Automotive Body Repair Technology | Qualification |