Unit of competency Outline

Date retreived
22/07/2026 9:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Participate in laboratory or field workplace safety

Participate in laboratory or field workplace safety

Unit of competency
National Code
MSL943004
State Code
OAB95
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
20/07/2018
View on TGA
State Implementation and Classification
Approved Date
29/11/2018
Field of Education
061301 - Occupational Health And Safety
Original Release Date
29/11/2018
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge to follow work health and safety (WHS) policies and procedures, deal with the identification and control of hazards, work safely at all times, follow emergency response procedures and contribute to the maintenance of workplace safety. This unit of competency applies to laboratory assistants and instrument operators working in all industry sectors. WHS responses are restricted to a 'first response' approach, including the notification of appropriate workplace personnel. Workers will be provided with clear directions, information, training and appropriate supervision. No licensing or certification requirements exist at the time of publication. However, regulations and/or external accreditation requirements for laboratory operations exist, so local requirements should be checked. Relevant legislation, industry standards and codes of practice within Australia must also be applied.
Notes
Elements and Performance Criteria
1. Prepare to install, vehicle sunroof
  • 1.1 Determine job requirements according to workplace instructions
  • 1.2 Access and interpret original equipment manufacturer (OEM) specifications and product installation instructions
  • 1.3 Select installation option according to identified job requirements
  • 1.4 Identify hazards and environmental issues associated with work tasks, assess potential risks and implement control measures in line with workplace policies and procedures
  • 1.5 Select and source equipment according to job requirements
  • 1.6 Check equipment for serviceability
2. Install and test vehicle sunroof
  • 2.1 Install sunroof according to manufacturer specifications, workplace procedures and safety requirements
  • 2.3 Conduct post-installation testing of sunroof functionality according to workplace procedures
  • 2.4 Test sunroof sealing and adjust where required, in accordance with workplace policies and procedures
  • 2.5 Conduct final inspection and confirm vehicle is ready for use in line with road safety standards
  • 2.5 Safely store, transport and dispose of hazardous materials and dangerous goods
3. Complete work processes
  • 3.1 Clean work area, collect recyclable material and dispose of waste and non-recyclable materials
  • 3.2 Check, tag, and isolate faulty tools and equipment according to workplace procedures
  • 3.3 Store working tools and equipment according to workplace procedures
  • 3.4 Document installation and testing process according to workplace procedures
4 Contribute to health and safety in the workplace
  • 4.1 Raise WHS and environmental issues with designated personnel in accordance with workplace procedures and legislated rights and obligations of employees
  • 4.2 Participate in WHS activities within scope of responsibilities
No information
No information
Replaces
State Code National Code Title Type
AWO38 MSL943002 Participate in laboratory or field workplace safety Unit of competency