Unit of competency Outline
Date retreived
22/07/2026 8:57 PM AWST
22/07/2026 8:57 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Dismantle/re-assemble furniture
Dismantle/re-assemble furniture
Unit of competency
National Code
LMFFF2002B
LMFFF2002B
State Code
W8507
W8507
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
19/09/2008
Field of Education
040311 - Carpentry And Joinery
Original Release Date
19/09/2008
Nominal Hours
56
Description
This unit covers the competency to dismantle and re-assemble furniture and/or fittings for the purposes of coating, repair, restoration, producing patterns, templates or for samples.
Notes
Elements and Performance Criteria
1. Prepare for work
- 1.1. Item to be dismantled is inspected and components identified
- 1.2. OHS requirements, including personal protection needs, are observed throughout the work
- 1.3. Work required, including the process/order for dismantling according to the workplace procedures, is identified
- 1.4. Tools and equipment are selected and checked for safe and effective operation for the task
2. Dismantle furniture/ furnishing item
- 2.1. Items to be dismantled are identified
- 2.2. Items are dismantled to the extent required in the work instructions using appropriate tools and procedures
- 2.3. Fasteners and attachments are removed, tagged and stored
- 2.4. Component parts are separated, tagged and stored following workplace procedures
- 2.5. Component parts dispatched to the next process according to workplace procedures
3. Dismantle furniture/ furnishing item
- 3.1. Items to be re-assembled are identified
- 3.2. Items are re-assembled to the extent required in the work instructions using appropriate tools and procedures
- 3.3. Fasteners and attachments selected and used according to workplace procedures
- 3.4. Fasteners and attachments selected and used according to workplace procedures
- 3.5. Assembled item dispatched to the next process according to workplace procedures
4. Clean work area maintain equipment and complete operations
- 4.1. Equipment used is cleaned, inspected for serviceable condition and stored according to workplace procedures
- 4.2. Equipment faults are identified, tagged and reported to appropriate personnel
- 4.3. Work area is cleaned and returned to operational condition
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
OHS requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate some discretion, judgement and problem solving skills during the process of dismantling of furniture and/or furnishings
Furniture and/or furnishings may include but are not limited to:
chairs
tables
desks
wall units
buffets
side tables
drawers
Work can involve dismantling and re-assembling of furniture for repair and restoration
Tools and equipment may include, but are not limited to:
measuring tapes or rulers
hammers
rubber mallet
pincers
screwdrivers
shifting spanner
spanners
socket set
hacksaw and blades
clamps
timber wedges
long nose pliers
power drill/screwdrivers
air compressor and hoses
Materials to be used may include but are not limited to:
timber
manufactured board
veneer
brass
metal
adhesive
laminate
perspex
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
OHS requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate some discretion, judgement and problem solving skills during the process of dismantling of furniture and/or furnishings
Furniture and/or furnishings may include but are not limited to:
chairs
tables
desks
wall units
buffets
side tables
drawers
Work can involve dismantling and re-assembling of furniture for repair and restoration
Tools and equipment may include, but are not limited to:
measuring tapes or rulers
hammers
rubber mallet
pincers
screwdrivers
shifting spanner
spanners
socket set
hacksaw and blades
clamps
timber wedges
long nose pliers
power drill/screwdrivers
air compressor and hoses
Materials to be used may include but are not limited to:
timber
manufactured board
veneer
brass
metal
adhesive
laminate
perspex
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Locate, interpret and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the construction of the item being dismantled/re-assembled
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self or others
prevent damage to goods or equipment
maintain required work output and quality
Dismantle and re-assemble at least three different items, including:
one assembled with knockdown fittings, and
one with glued joints
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource Implications
Furniture/furnishings for dismantling/re-assembling, work instructions, tools and equipment.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may, where appropriate, be in conjunction with assessment of other units of competency.
Contexts of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Locate, interpret and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Identify materials used in the construction of the item being dismantled/re-assembled
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self or others
prevent damage to goods or equipment
maintain required work output and quality
Dismantle and re-assemble at least three different items, including:
one assembled with knockdown fittings, and
one with glued joints
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource Implications
Furniture/furnishings for dismantling/re-assembling, work instructions, tools and equipment.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may, where appropriate, be in conjunction with assessment of other units of competency.
Contexts of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0254 | LMFFF2002A | Dismantle/reassemble furniture | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI314 | MSFFF2002 | Dismantle and re-assemble furniture | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W030 | LMF30202 | Certificate III in Furniture Finishing | Qualification |
| W022 | LMF20202 | Certificate II in Furniture Finishing | Qualification |