Unit of competency Outline

Date retreived
22/07/2026 8:25 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair vehicle composite material components

Repair vehicle composite material components

Unit of competency
National Code
AURVTS004
State Code
AWZ26
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to repair components on vehicle bodies using composite materials. It involves preparing for the task, selecting and using specialist tools and equipment, identifying suitable composite materials, calculating material quantities, mixing and applying recommended composite materials to repair components according to workplace and customer specifications, and completing workplace processes and documentation.It applies to those working in the automotive service and body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to repair vehicle composite material component
  • 1.1 Workplace instructions are used to determine job requirements
  • 1.2 Fibreglass and composite material repair information is accessed and interpreted from workplace procedures and manufacturer specifications
  • 1.3 Composite materials are identified, selected and inspected for quality
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Work area with approved ventilation is checked for correct operation and faults are reported to authorised personnel
  • 1.6 Composite tools and equipment and personal protective equipment (PPE) are identified and checked for serviceability
  • 1.7 Work area is prepared and work is planned to identify methods for repairing a vehicle using composite materials and to minimise waste
2. Carry out repair activities
  • 2.1 Items to be repaired are located and damage or faults are assessed to determine repair methods
  • 2.2 Tools and equipment are set up and materials are mixed and prepared for use
  • 2.3 Repairs to composite material components are carried out according to workplace procedures and safety and environmental requirements
  • 2.4 Reinforcement techniques are applied to reinstate pre-damage strength to composite materials
  • 2.5 Finishing techniques are applied to present composite surfaces to manufacturer and workplace quality standards
  • 2.6 Repairs to composite material components are completed without causing damage to equipment and components
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace and customer specifications, and components are presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF551 AURVTS3004 Repair fibreglass and composite material components Unit of competency
Replaced By
State Code National Code Title Type
OCI91 AURVTS104 Repair vehicle composite material components Unit of competency