Unit of competency Outline

Date retreived
22/07/2026 3:42 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate small plant and equipment

Operate small plant and equipment

Unit of competency
National Code
RIISAM204E
State Code
OCC92
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
23/09/2020
View on TGA
State Implementation and Classification
Approved Date
05/03/2021
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/03/2021
Nominal Hours
30
Description
This unit describes the skills and knowledge required to operate small plant and equipment in the resources and infrastructure industries.It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of own work outcomes.Licensing, legislative and certification requirements mayapply to this unit and can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Prepare for operating small plant and equipment
  • 1.1 Obtain, interpret, and confirm work requirements
  • 1.2 Access, interpret and apply documentation and procedures
  • 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures according to workplace procedures
  • 1.4 Select and wear personal protective equipment required for work activities
  • 1.5 Select and check for faults in plant, tools and equipment, and confirm they are appropriate for the work activity
  • 1.6 Obtain and interpret emergency procedures and be prepared for emergency situations
2. Conduct pre-operational checks
  • 2.1 Select and use fuel and lubricants according to workplace procedures
  • 2.2 Check and adjust fuel, oil, hydraulic fluid and water levels
  • 2.3 Inspect, secure and maintain bolts, nuts, guards and attachment couplings
  • 2.4 Check and adjust the function of controls and gauges
  • 2.5 Conduct start up and shut down procedures according to workplace procedures
3. Use small plant and equipment
  • 3.1 Identify hazards during work and establish appropriate risk management controls
  • 3.2 Identify and apply operating techniques to achieve optimum output while maintaining specified tolerances
  • 3.3 Operate plant and equipment to produce results within specified workplace tolerances
  • 3.4 Store plant and equipment safely when not in immediate use
4. Carry out operator maintenance
  • 4.1 Prepare machine for maintenance
  • 4.2 Conduct inspection and check plant and equipment for serviceability, identify, and rectify and report any faults
  • 4.3 Carry out scheduled maintenance tasks
5. Conduct housekeeping activities
  • 5.1 Clear work area and dispose of materials
  • 5.2 Clean and maintain condition of equipment, ensure suitability for use, and address and report issues
  • 5.3 Complete written records and reports
No information
No information
Replaces
State Code National Code Title Type
WH655 RIISAM204D Operate small plant and equipment Unit of competency