Unit of competency Outline

Date retreived
23/07/2026 3:07 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install internal shop walls and fixtures

Install internal shop walls and fixtures

Unit of competency
National Code
CPCSHP3008
State Code
OCM23
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
030113 - Cabinet Making
Original Release Date
01/06/2021
Nominal Hours
65
Description
This unit of competency specifies the skills and knowledge required to prepare, set out and install wall frames, partitions and wall linings to areas such as fitting or treatment rooms in internal shop areas. It includes fitting doors and windows, fixing mouldings and installing fixtures. It applies to shopfitters engaged in creating new shops or renovating existing shops. The work is completed onsite concurrently with other shopfitting work that must be scheduled to accommodate client requirements, the shop when it is operational, and the requirements of other shopfitters and associated contractors.Individuals at this level take responsibility for organising and completing these tasks with a high degree of self-direction.No licensing, legislative or certification requirements apply to this unit of competency at the time of publication.Completion of the general construction induction training program, specified in the Safe Work Australia modelCode of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.
Notes
Elements and Performance Criteria
1 Plan and prepare to install internal shop walls and fixtures.
  • 1.1 Read and interpret plans and specifications to confirm job requirements.
  • 1.2 Interpret and apply organisational quality assurance requirements appropriate for the project.
  • 1.3 Determine material type and calculate quantities to complete the task.
  • 1.4 Determine job priorities and sequence job tasks in consultation with others in the workplace to ensure timeframes are met.
  • 1.5 Inspect worksite conditions, identify hazards and implement risk control measures following work health and safety requirements and environmental practices.
  • 1.6 Select, fit and use personal protective equipment (PPE) for the task.
  • 1.7 Select tools and equipment for the task.
  • 1.8 Check for serviceability and rectify and report faults.
  • 1.9 Receive and check delivered materials for completeness and conformity with job requirements and identify and report any discrepancies or damage.
  • 1.10 Place materials in a safe and secure position ready for use.
2 Install internal wall framing and lining.
  • 2.1 Set out Internal wall framing parallel and square to existing structure.
  • 2.2 Set out frame with door and window openings, cut frame members and assemble ready to erect.
  • 2.3 Stand frame into position, level, square and plumb and use appropriate fixing method and fastenings appropriate for the existing structure.
  • 2.4 Mark and cut lining material to length, and shape and fix to frame to meet job requirements.
3 Install partitions.
  • 3.1 Set out and mark position of pre-assembled or onsite assembled partitions to plan dimensions.
  • 3.2 Cut partition components accurately to size and locate connection points.
  • 3.3 Install and secure each component junction tight together and flush with face using specified fixings and fastenings.
  • 3.4 Secure, square and plumb assembled partitions within accepted industry tolerances.
4 Cut and fix decorative mouldings.
  • 4.1 Mark, cut to length, fit and fix specified mouldings.
  • 4.2 Fit and fix mitre joints flush to face and true.
  • 4.3 Mark and cut to length scribed joints.
  • 4.4 Set out, mark and fix specified fixtures.
5 Clean up.
  • 5.1 Clear work area and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 5.2 Clean tools and equipment, check for serviceability and report damage or faults.
  • 5.3 Store and secure tools and equipment following workplace procedures.
No information
No information
Replaces
State Code National Code Title Type
BBA98 CPCCSH3008 Install internal shop walls and fixtures Unit of competency
State Code National Code Title Type
BGD2 CPC30120 Certificate III in Shopfitting Qualification