Unit of competency Outline

Date retreived
22/07/2026 8:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install marine electrical systems and components

Install marine electrical systems and components

Unit of competency
National Code
AURRTR007
State Code
AXB39
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030505 - Automotive Electrics And Electronics
Original Release Date
13/07/2016
Nominal Hours
15
Description
This unit describes the performance outcomes required to install low voltage marine electrical systems and components, such as dash instrumentation, switch and fuse panels, bilge pumps, lighting, global positioning systems (GPS), depth sounders, fish finders, communications equipment and radars. It involves preparing for the task, installing and testing the operation of the electrical systems and components, and completing workplace processes and documentation.It applies to those working in the marine service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to install marine electrical system and components
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Installation procedures and information are sourced and interpreted
  • 1.3 Installation options are analysed and those most appropriate to the circumstances are selected
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools, equipment and materials are selected and checked according for serviceability
2. Install and commission electrical system and components
  • 2.1 System is checked for correct application and components are checked for damage
  • 2.2 System and components are installed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems
  • 2.3 Installed system and components are tested for correct operation and required adjustments are made according to manufacturer specifications, workplace procedures and safety requirements
  • 2.4 Final adjustments are made and marine electrical systems and components are re-tested in normal operating conditions
3. Complete work processes
  • 3.1 Final inspection is made to ensure work is to workplace expectations and vessel is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 3.3 Tools and equipment are checked and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF344 AURRTR3004 Install marine electrical systems and components Unit of competency
WF342 AURRTR3002 Install marine electronic systems and components Unit of competency