Unit of competency Outline

Date retreived
22/07/2026 7:21 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test marine engines in water tanks

Test marine engines in water tanks

Unit of competency
National Code
AURRTE010
State Code
AXB49
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
031701 - Maritime Engineering
Original Release Date
13/07/2016
Nominal Hours
16
Description
This unit describes the performance outcomes required to performance test a marine engine in a water tank. It involves preparing for the task, setting up the test equipment, performance testing the engine, and completing workplace processes and documentation.It applies to those working in the marine service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to water test marine engine
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Testing information is accessed and interpreted, and testing options appropriate to the circumstances are selected
  • 1.3 Work area is set up according to job and workplace requirements
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Testing tools and equipment are selected and checked for serviceability
2. Set up engine and testing equipment
  • 2.1 Engine is prepared for testing according to workplace procedures and safety and environmental requirements
  • 2.2 Engine is set in testing area according to manufacturer specifications, workplace procedures and safety requirements
  • 2.3 Testing equipment is attached to engine according to manufacturer specifications and workplace procedures
3. Performance test engine
  • 3.1 Engine is started and operated through speed range according to manufacturer specifications, workplace procedures and safety requirements
  • 3.2 Performance data is recorded during engine test sequence according to workplace procedures
  • 3.3 Engine performance data is compared with manufacturer specifications, and discrepancies are noted
  • 3.4 Testing equipment is removed from engine, and engine is removed from test area, according to manufacturer and workplace procedures and safety requirements
  • 3.5 Test report is prepared and recommendations are made for repairs or modifications according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and engine is presented ready for use or stored according to workplace procedures
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF332 AURRTE3010 Water test engines in tanks Unit of competency